The eye drops filling production line usually consists of fully automatic bottle sorting machines, eye drops filling capping machines, vertical labeling machines, etc., which can complete bottle sorting, filling, plugging, capping and other processes. It is mainly used for the online production of eye drops and other low-dose solutions.
The operation and usage standards of the eye drops filling production line mainly include the following aspects:
Operating standards: Operators must be familiar with the equipment's user manual and operating procedures, strictly follow the operating procedures, and avoid equipment damage caused by misoperation or improper operation.
• Safety protection: Operators should wear appropriate protective equipment, such as gloves, masks, etc. The equipment should be installed in a well ventilated and dry environment to ensure safe operation.
Daily cleaning: After each use, the equipment should be promptly cleaned of any medication, glass shards, and other debris. Regularly wipe the surface of the equipment with cleaning agents and a soft cloth to keep it clean.
Lubrication and maintenance: According to the requirements of the equipment manual, regularly add new lubricating oil to the lubrication points, check the amount and quality of lubricating oil, and ensure smooth operation of the equipment.
• Component inspection: Regularly inspect various components of the equipment, such as filling needles, sealing rings, pipelines, etc. If any parts are found to be worn or damaged, they should be replaced or repaired in a timely manner.
Electrical inspection: Regularly inspect the electrical system of equipment, such as power lines, sockets, grounding wires, etc., to ensure that the electrical system is functioning properly and prevent issues such as leakage or short circuits.
• Troubleshooting: When the equipment malfunctions, it should be immediately shut down and the power should be cut off. Troubleshooting should be carried out according to the equipment manual or relevant maintenance manual. If it cannot be resolved, professional maintenance personnel should be contacted for inspection.
Environmental requirements: The eye drops filling machine is suitable for use in a constant temperature environment with an ambient temperature of -5 ℃~40 ℃ and a relative humidity of less than 90%. It should be placed in a ventilated, dry, and clean location.
Power check: Before starting up, check whether the power voltage is normal and whether the socket has a safety grounding wire. When the power cord is found to be damaged, it must be replaced with a power cord of the same model and specification in a timely manner, and other power cords must not be used as a substitute.
Vacuum pump maintenance: 20 # mechanical oil should be added to the vacuum pump, and the oil volume must be controlled at the specified position of the oil window. When the vacuum pump is not in use for a long time, the oil inside the pump should be drained and rinsed with new oil or replaced to prevent moisture in the oil from corroding the pump body.