The semi-automatic oil filling machine is widely used in various fields, mainly including the filling, packaging and measurement of lubricating oil, edible oil, bottled wine, chemical products, spices and other oils, oils, oils and liquid materials.
The precautions for using a semi-automatic oil filling machine include the following aspects:
Pre operation inspection: Before starting up, it is necessary to check whether there is any leakage in the power cord and plug to ensure that there is no leakage before use. At the same time, check whether the parts of the filling machine equipment are worn or malfunctioning, and promptly handle any abnormalities.
Equipment inspection: Before starting up, confirm that there are no foreign objects inside the equipment, whether the pressure and flow of compressed air are normal, and whether lubricating oil is needed for each motor, bearing, etc., to ensure that all parts of the equipment operate stably before normal use.
• Parameter setting: Set appropriate parameters based on the properties and requirements of the filling material, such as filling speed and filling volume, to ensure that the parameters are set according to standardization and to ensure the normal operation of the filling machine
Safe operation: Operators should wear appropriate protective equipment such as work clothes, gloves, glasses, etc., and avoid wearing clothing that may be caught by moving parts, such as scarves, bracelets, etc. When the machine is running, there must be a dedicated person monitoring to prevent other objects from approaching the machine.
• Cleaning and maintenance: Regularly clean, inspect, and maintain equipment to ensure proper operation. During the production process, oil stains, chemicals, or glass debris should be cleaned at all times. Before handing over the shift, the machine should be thoroughly cleaned and clean lubricating oil should be applied to all moving parts.
• Fault handling: In the event of equipment failure, it is necessary to promptly shut down the machine for handling or contact maintenance personnel for repair. When hearing abnormal noises from the equipment, immediately stop the machine and check the causehandle properlyRun it later.