The maintenance and upkeep of syrup filling machines mainly include the following aspects:

1. Daily maintenance:

• Cleaning: Clean the equipment before and after each use to ensure no syrup residue. You can use specialized cleaning agents, a mixture of vinegar and baking soda, dishwashing detergent, and other cleaning agents for cleaning.

Tightening: Check and adjust the position of the molds at each workstation of the equipment to ensure accurate filling. Check the air source pressure to ensure stability. Tighten all components of the equipment to prevent loosening.

• Inspection: Check whether the sensor probe can be used normally, inspect and observe whether the rotation and lifting of mechanical components are normal, whether there are any abnormalities, and whether the screws are loose.

2. Regular maintenance:

Quarterly maintenance: Clean the main chassis, inspect fastening components, add lubricating oil, and replace damaged conveyor belts.

Annual maintenance: Cut off the main power supply, clean the control box, check the cables and electrical components, add lubricating oil, and replace worn parts.

• Comprehensive inspection: Regularly conduct comprehensive inspections and maintenance of equipment, including mechanical components, electrical components, and hydraulic components, to ensure the normal operation of all functions of the equipment.

3. Attention:

• Abnormal phenomenon handling: If any abnormal noise or phenomenon is found in the equipment, it should be stopped immediately for inspection, and the fault should be eliminated before operation.

Clean the filter: Regularly clean or replace the filter of the filling machine to ensure the cleanliness of the conveyed liquid and avoid blockages or other issues.

Lubrication: Regularly inspect and lubricate the moving parts of the filling machine to ensure smooth operation and reduce friction and wear.

Electrical system inspection: Regularly check the wiring, switches, and control panels of the electrical system to ensure good electrical connections and avoid problems caused by electrical faults.

Through the above measures, the service life of the syrup filling machine can be effectively extended, ensuring the stability and reliability of the equipment.