The manufacturer of the salt spray corrosion test chamber is one of the "three protections" (humidity, salt spray, mold) testing equipment for artificial climate environments. It is an important testing equipment for studying the adaptability and reliability of various environments in industries such as machinery, defense industry, light industry electronics, and instruments. Its performance indicators meet the requirements of GB/T5170.8 "Basic Parameter Calibration Method for Environmental Testing Equipment for Electrical and Electronic Products".
The precautions for using the salt spray corrosion test chamber are briefly introduced by the editor below:
1. Regularly clean and maintain the pressure drum, salt water tank, and nozzle of the salt spray test chamber.
2. Do not block the rear exhaust pipe during the experiment to avoid excessive pressure inside the box causing deformation.
3. If the spray volume is insufficient, please raise the spray tower, and if the spray volume is too large, lower the spray tower (the standard for collecting spray volume is 1~2ml/h, taking the average value of 16 hours)
4. Do not manually add water to the sodium chloride solution from the pressure bucket. First, clean the measuring cylinder for adjusting the solution and then add distilled water to it.
5. Do not put flammable and explosive materials inside the box.