High speed tablet pressInstallation instructions:
1. This machine is packed as a whole and can be moved to a suitable place of use after unpacking. After leveling, it can be used. If the position is fixed, foot screws can be added.
2. Electrical circuits and devices should pay attention to voltage. For those not specified by the user, they should be set at 380 volts. When wiring, attention should be paid to the direction of motor rotation, which must be in the direction of the arrow on the machine, and must not be reversed. To ensure electrical safety, an effective grounding wire must be installed.
3. This machine should be used indoors in a dry, clean, and well lit environment.
High speed tablet pressMaintenance instructions:
1. Regularly inspect the mechanical components, 1-2 times a month, to check whether the moving parts such as worm gear, worm gear, bearings, pressure wheel, crankshaft, upper and lower guide rails are rotating flexibly and worn. If any defects are found, they should be repaired and used in a timely manner.
2. After a single use or shutdown, the remaining powder should be removed and the residual powder in the machine name section should be cleaned. If the machine has been out of use for a long time, the punching die must be completely removed and the machine must be wiped clean. The smooth surface of the machine should be coated with anti rust oil and covered with a cloth canopy.
3. The maintenance of the stamping die should be placed in a covered iron box, so that the stamping die is fully immersed in oil and kept clean to prevent rust and damage. Customized iron boxes can be used to pack each specification in one box, which can avoid installation errors during use and help to grasp the damage situation.
4. The place of use should be regularly cleaned, especially for pharmaceutical and edible tablet manufacturing, where there should be no dust or flying dust present.