Bubble wrap packaging machine is a machine that uses transparent plastic film or thin sheet to form a bubble wrap, and uses heat sealing, bonding and other methods to seal the product between the bubble wrap and the bottom plate. The daily maintenance and upkeep of bubble wrap packaging machines are very important. Today, the editor will take you to understand the maintenance methods of bubble wrap packaging machines.

1. The bubble hood machine should be regularly wiped, cleaned, and kept clean.

2. Regularly check the operation of the aluminum-plastic packaging machine and promptly address any issues found.

3. According to lubrication requirements, lubricate the aluminum-plastic blister packaging machine on time

4. The cooling parts of the bubble wrap packaging machine must not be disconnected from water during operation. Before starting up, supply water first, and then heat the heating components; When terminating production, stop supplying water only after the heating components have reached room temperature.

5. The surface of the heat sealing roller should be kept clean, and when removing attachments, a fine copper wire brush should be used while heating. At the same time, the operator should pay attention to the amplitude of the operation and the distance between their hands, arms, and body and the heating roller to avoid burns.

6. After the work is completed, cut off the power first, cool down all heating components to room temperature, and then turn off the water and gas sources.

7. When using or storing grinding tools, be careful not to bump or scratch them, and do not come into contact with corrosive substances.

8. When the equipment is not in use for a long time, the accumulated water in the water and gas circuits should be blown out with compressed air, and all parts should be coated with oil and covered with plastic.