High speed rotary tablet press is an automatic rotating continuous tablet press machine, which is the basic equipment for processing various granular raw materials into tablets in the pharmaceutical, chemical, food and other industrial sectors. So, how to use the high-speed rotary tablet press correctly?
The workflow of high-speed rotary tablet press:
1. Before use, it is necessary to double check the quality of the punching die, whether there are missing edges, cracks, deformations, and whether the tightness does not meet the requirements, and whether the device is complete and good before working.
2. Check whether the powder of the granular raw material is dry and whether the powder content in the particles does not exceed 10%. If it is unqualified, do not use it hard, otherwise it will affect the normal operation and service life of the machine and the loss of raw materials.
3. For the initial test run, the pressure adjustment control indicator should be placed in the '0' position, the powder should be poured into the hopper, and the test handwheel should be manually rotated to adjust the filling and pressure, gradually increasing the weight and hardness of the tablets to meet the requirements of the finished product. Then, the electric motor should be turned on first, and then the clutch should be turned on for formal production. During the production process, the quality of the tablets should be checked regularly to see if they meet the requirements, and adjustments should be made if necessary.
4. The choice of speed has a direct impact on the service life of the machine. Due to the nature, viscosity, sheet size, and pressure of the raw materials, which cannot be uniformly regulated in use, the structure of this machine can be divided into two types: fast and slow. The slow speed uses the Yangtze River Delta to drive the outer rope wheel, which is suitable for pressing minerals, plant grass, and other materials that are difficult to form quickly. The fast speed uses a short triangle to drive the inner rope wheel, which is suitable for pressing, bonding, lubricating, and easy to form materials. Therefore, the user must choose according to the actual situation.
5. The manager must be familiar with the technical performance, internal structure, and operating principles of the control mechanism of the machine, and must not leave the workplace during operation to prevent damage to the machine due to malfunctions and ensure safe production as a prerequisite.
6. During use, always pay attention to whether the machine noise is normal. If there is a sharp sound, stop the machine immediately for inspection and elimination. Do not use it forcefully.