When maintaining equipment, it is necessary to comply with relevant national regulations, first stop the machine, cut off the power, and exhaust the air, and then carry out maintenance, cleaning, and upkeep.
2. Keep a dedicated cleaning tool for the disc type airflow crusher on hand for cleaning! Designated tools should be used to avoid using other cleaning tools that do not meet the requirements and to prevent irreversible damage to the equipment structure.
3. Regularly clean the cooling water channel. When cleaning, the machine water valve should be closed first to drain all the cooling water from the water tank. After cleaning, reconnect the waterway to ensure the equipment is working properly.
4. The gears and chains of the disc type airflow crusher are subjected to large impact loads, and it is necessary to regularly add lubricating oil as required, and clean and filter the old oil before lubrication to ensure the cleanliness and renewal of the lubricating oil.
5. Clean the cleaning, drainage, lubrication, and other areas of the equipment after several hours of operation, and remove dust and dirt inside the equipment.
6. Regularly check whether the internal electrical circuits of the machine are damaged. If any damage is found, it should be replaced in a timely manner to avoid accidents.