-
E-mail
1863437@qq.com
-
Phone
13777759681
-
Address
No. 4, Lane 1, Zhangjiaqiao, Shacheng Bajia Industrial Zone, Wenzhou City, Zhejiang Province
Wenzhou Xiaojie Machinery Co., Ltd
The structural principle of stainless steel colloid mill
Date: 2024-07-31Read: 9
Stainless steel colloid mill equipment is an efficient fine grinding device, and its process principle has been widely used in various industries.
The stainless steel colloid mill equipment consists of a host, cooling system, colloid pump, electrical box, pipeline, etc. Its main parts are the grinding disc and grinding arm, which carry abrasive particles for grinding in the high-speed rotating grinding disc. The use of stainless steel colloid mill equipment for material grinding mainly achieves centrifugal effect through the grinding disc, and multiple forces such as friction, impact, and shear promote the refinement of material particles. To achieve refinement, it is also necessary to control the size of abrasive particles to achieve the desired results.
The process principle of stainless steel colloid mill equipment can be summarized as follows:
1. High speed rotation of grinding disc
The main component of stainless steel colloid mill equipment is the grinding disc, which can carry abrasives for running in during high-speed rotation. Stainless steel colloid mill equipment usually adopts electromechanical integration design, and uses high-quality bearings and original motors to ensure the operation speed and safety of the equipment.
2. Abrasive generates negative pressure
During the rotation of the grinding disc, a negative pressure zone is generated, causing the material to be sprayed from the upper part into the gap between the abrasive that is about to collide, thus forming a high-speed vortex, causing frequent friction, impact, and forced shear between the abrasives, resulting in continuous refinement of the material particles.
3. Temperature control generated by frictional heat
During the high-speed friction running in process, a large amount of frictional heat is generated, which affects the temperature of the material. Therefore, in order to control the temperature of the material and the service life of the equipment, a cooling system needs to be installed in the stainless steel colloid mill equipment for heat control.
4. Abrasive particle size control
While refining the material particles, it is also necessary to control the size of the abrasive particles to achieve the final desired level of fineness. This can be achieved by controlling the feeding amount of the grinding disc, adjusting the rotation speed of the grinding disc, and using different abrasive materials. At the same time, certain sorting devices can be set up to screen the finely ground materials, improving the accuracy and purity of the products.
Last Article: Process principle of horizontal pipeline colloid mill
Next Article: Principle and advantages of split colloid mill