Micro porous filter is a device used for water treatment, which can separate impurities, suspended solids, bacteria and other small particles in water through a filter to improve water quality. This device has a compact structure, easy operation, and good filtration effect, and is one of the commonly used devices in the field of water treatment.
Today, the editor will take you to understand the operating procedures of the microporous filter machine.
1、 Preparation work
Before operating the microporous filter, the following preparations must be made:
1. Check if the device is in normal condition and if there are any abnormal situations
2. Prepare the filter, check if it is intact, and remove any impurities from its surface.
3. Prepare the necessary cleaning agents and tools (such as steamers, brooms, etc.)
2、 Normal operation
Before performing normal operation of the microporous filter, please confirm the following operating procedures
1. Turn on the machine power:
2. Fill the water inlet, taking care not to exceed the height of the inlet;
3. Adjust the outlet valve to ensure smooth water flow;
4. During the operation, it is necessary to regularly check the operation of the microporous filter, such as whether it is running normally, whether there are any abnormal sounds, and whether the water flow is stable.
3、 Cleaning and maintenance
After long-term use, the microporous filter will produce many pollutants that affect the filtration effect. Therefore, to ensure the normal use of the microporous filter, it is recommended to regularly clean it:
1. Disinfection and cleaning: Firstly, turn off the power of the microporous filter and disconnect the inlet and outlet pipelines. Clean the debris inside the microporous filter, then use disinfectant to clean it. After a certain period of time, rinse the disinfectant thoroughly with steam.
2. Aeration cleaning: When the microporous filter needs to be shut down for a long time, the pollutants in the water should be cleaned first, and then clear water should be passed into the filter. The gas valve should be opened for aeration cleaning to remove dirt and odors inside the filter.
3. Disassembly and cleaning: When the microporous filter machine encounters abnormal conditions such as unstable or weakened water flow, it should be disassembled and cleaned in a timely manner to remove the dirt inside the filter.