-
E-mail
359912789@qq.com
-
Phone
15921129650
-
Address
435 Chongnan Road, Xiaokunshan Town, Songjiang District, Shanghai, Area B
Product Categories
Shanghai Xulun Environmental Protection Technology Co., Ltd
10 inch PTFE filter cartridge
NegotiableUpdate on 01/20
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The 10 inch PTFE filter cartridge is made of PTFE microporous membrane, with high filtration accuracy, high flux, and excellent chemical corrosion resistance. The biosafety and heat source control indicators comply with the sixth level biosafety standards of the United States Pharmacopeia (USP) XXXII edition. Before leaving the factory, the filter element undergoes integrity tests such as bubble point and diffusion flow. Suitable for clarification and sterilization filtration of gases and highly corrosive liquids. Membrane can be divided into two types based on their properties: hydrophobic and hydrophilic.
Product Details
10 inch PTFE filter cartridgeProduct Overview:
The PTFE filter cartridge is made of PTFE microporous membrane, with high filtration accuracy, high flux, and good chemical corrosion resistance. The biosafety and heat source control indicators comply with the sixth level biosafety standards of the United States Pharmacopeia (USP) XXXII edition. Before leaving the factory, the filter element undergoes integrity tests such as bubble point and diffusion flow. Suitable for clarification and sterilization filtration of gases and highly corrosive liquids. Membrane can be divided into two types based on their properties: hydrophobic and hydrophilic.
10 inch PTFE filter cartridgeSpecifications:
| filtration accuracy | filtration efficiency | filtration area | Gas flux | water flow rate |
| 0.01/0.22μm | 100% | 0.7㎡ | 6Nm³/min10” | 6.89L/min10” |
| pressure difference | sterilization temperature | Operating Temperature | Filter cartridge length | |
| 0.4MPa25℃ | 138℃ 30min | ≤90℃ | 5 ", 10", 20 ", 30", 40 " | |
Product characteristics of polytetrafluoroethylene filter cartridge:
1. Excellent thermal and chemical stability, known for its chemical inertness and solvent resistance, it is a corrosion-resistant and high-temperature sterilization grade filter element.
2. Hydrophilic filter cartridges can increase the flow rate of polar liquids, especially suitable for filtering various highly corrosive media and oxidizing liquids.
3. Strong applicability and can be repeatedly disinfected; Folding structure, large filtering area, long service life.
4. Excellent hot melt technology, no adhesive, no secondary pollution.
5. Hydrophobic filter cartridges have a 375% higher resistance to water corrosion than ordinary polyvinylidene fluoride filter cartridges.
6. Precision, intercepting various bacteriophages, bacteria, and particles, and gas filtration up to 0.01 μ m.
7. The higher porosity increases the filtration flow rate.
