10000ml double-layer glass reactor

NegotiableUpdate on 05/25

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The 10000ml double-layer glass reaction kettle is a commonly used biochemical instrument, widely used in modern fine chemical, biopharmaceutical, scientific research and experimental industries. It can perform concentration, distillation, reflux, separation, and purification reactions under constant speed, constant force, and constant temperature conditions; It is an ideal instrument and equipment for teaching, experimentation, pilot testing, and production. While stirring the materials, inject circulating hot solution or coolant through the interlayer to heat or cool the materials inside the kettle at a constant temperature.

Product Details

10000ml double-layer glass reactorworking principle

This machine is equipped with an electric constant speed stirring system, a condensation and dropwise addition system, and an external heating or cooling cycle equipment for the interlayer of the kettle body. While stirring the materials, inject circulating hot solution or coolant through the interlayer to heat or cool the materials inside the kettle at a constant temperature. When the material undergoes a heating reaction, the evaporation efficiency can be improved under vacuum conditions (by connecting a vacuum device). The solvent vapor is cooled into a liquid through a glass condenser coil (by connecting a cooling device), which can be refluxed into the kettle or recovered through the lower valve of the reflux elbow. After the reaction is complete, the material can be discharged from the side outlet at the bottom of the kettle.

This series of products requires a system device consisting of vacuum equipment, high-temperature or low-temperature circulation equipment, etc.

Basic Configuration

All parts in contact with the material are made of high borosilicate glass (expansion coefficient 3.3) and polytetrafluoroethylene material, which have stable performance and are not prone to chemical reactions with the material.

The frame type main body is made of aluminum alloy and stainless steel material.

Glass+PTFE discharge valve, no liquid accumulation side discharge.

Low speed booster motor, electronic stepless speed regulation, fine tuned by rotary knob, dual display speed control box can digitally display speed and material temperature inside the kettle.

The mixing system adopts ceramic bearings and mechanical seals to prevent the mixing rod from wear and debris.

Adopting PT100 temperature sensor, made of 304 stainless steel material, covered with transparent polytetrafluoroethylene tube, dual anti-corrosion.

The vacuum pressure gauge displays real-time vacuum and the pointer displays.

Crescent shaped stirring blade, made of 304 stainless steel and PTFE stirring blades; The material of the stirring rod is 304 stainless steel, wrapped with polytetrafluoroethylene tube.

The bottom of the machine is equipped with universal wheels with brakes, which can move as a whole and are easy to operate.

• Fuse safety protection.

10000ml double-layer glass reactorTechnical Specifications

model		GSFT-10L
Capacity of the kettle body		10L inner diameter 230mm outer diameter 290mm inner length 354mm
Mezzanine capacity		About 3.5L
voltage frequency		220V/50HZ
Mixing motor power		90W1/3
stirring speed		0-450rpm/min
Temperature range of kettle body		-80℃~ +250℃
Temperature measurement accuracy		±1℃
真空度		0.098Mpa
Kettle lid Φ265mm six mouths	Mixing port	Φ 50mm flange mouth
	Condensation reflux port	50 # ball milling port
	Constant pressure funnel mouth	40 # label
	Decompression port	34 # label
	temperature measurement port	Φ 45mm flange mouth
	Solid feeding port	The inner diameter of the flange mouth is Φ 80mm, and it is matched with a PTFE cover
stirring paddle		Φ 17 × 700H (mm) blade span 150mm
condenser		Flange mouth with a diameter of 100mm × 600H (mm) and a diameter of 60mm
Condensation area		0.4㎡
Reflux elbow		50 # ball mill plug on the left side of the flange mouth with a diameter of 60
Constant pressure funnel		1L upper 29 # standard port with glass plug and lower 40 # standard plug
pressure reducing valve		34 # standard plug valve vent nozzle (pagoda joint) with an outer diameter of 12mm
Intermediate inlet and outlet for circulation		A flange with a diameter of 45mm is matched with a flange plate and a 4-point external thread adapter
Discharge port		Φ 75mm flange, Φ 33mm discharge hole, inclined discharge outlet (pagoda joint), Φ 34mm, 350mm off the ground
Vacuum suction nozzle		Pagoda joint outer diameter 12mm
Condenser coil inlet and outlet circulation nozzle		Pagoda joint outer diameter 15mm
Space occupied by the whole machine		780 × 550 × 1870mm in width, depth, and height
Net weight of the machine		49KG
Package dimensions		1390 × 530 × 810mm wooden crate 0.60m ³
package weight		83KG