Anaerobic drying oven FB series

Operation of anaerobic drying oven:
Anaerobic oven, all wall joints are welded with argon arc welding, which has excellent sealing performance and can quickly remove oxygen or cool down, helping to improve product quality. It can meet the requirements of non oxidative drying in electronic, medical and health, instrumentation, factories, universities, scientific research and other departments.

Characteristics of anaerobic drying oven:
1. Inner wall argon arc full welding, high temperature resistant silicone compression, good air tightness;
2. High temperature resistance and cleanliness;

Technical parameters of anaerobic drying oven
1. Name and model: Anaerobic oven
2. Main technical indicators:
2.1 Oxygen concentration: ≤ 0.5%;
2.2 Temperature range: RT (room temperature)+50~+300 ℃;
2.3 Temperature deviation: ≤± 2.0 ℃;
2.4 Heating rate: ≥ 5 ℃/min (average throughout the entire process);
2.5 Power Supply: AC220V 50HZ 3KW

3. Box structure:
3.1 Box Material: The outer box is made of SS41 # medium carbon steel plate treated with phosphate film salt and coated with two layers of anti gloss paint;
3.2 Interior material: SUS304 # non-magnetic mirror stainless steel is used;
3.3 Thermal insulation material: ultra-fine glass wool;
3.4 Exhaust port: ф 50; 3.5 Partition: 2 layers, stainless steel square tube, load-bearing capacity of about 30KG; 3.6 Air circulation device: large capacity axial motor; 3.7 Heating method: stainless steel electric heater;

4. Temperature control system
4.1 Temperature measurement sensor: Pt100 platinum resistor;
4.2 Control instrument: imported digital temperature controller, PID regulation, control accuracy of 0.1 ℃;
4.3 Overtemperature protection instrument: an overtemperature protection system independent of the main control of the studio, ensuring the safety of the test sample;
4.4 Control System: The main electrical components are all imported raw materials such as Snyder and Omron

Anaerobic drying oven execution and compliance with standards
GB/T11158-1989 Technical Conditions for High Temperature Test Chamber
GB2423.2-1989 Test B

Application of anaerobic drying oven
Anaerobic ovens are suitable for electronic liquid crystal displays LCD、CMOS、IC、 Pharmaceutical, laboratory and other production and research departments.
Anaerobic ovens can also be used for drying, heat treatment, aging, and other high-temperature tests of non-volatile and non flammable and non explosive materials.