Application of stainless steel plate frame multi-layer filter

NegotiableUpdate on 02/11

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Stainless steel plate frame multi-layer filter is suitable for closed filtration of liquids with a concentration below 50%, low viscosity, and low slag content to achieve purification, sterilization, clarification, and other requirements for fine filtration, activated carbon removal, particle removal, and semi fine filtration. It can directly use microporous membrane filters and achieve sterile filtration without the need for microporous thin membrane filters.

Product Details

Application of stainless steel plate frame multi-layer filter：
This machine is a stainless steel multi-layer plate frame filter press, suitable for closed filtration of liquids with low viscosity and low slag content below 50% concentration to achieve purification, sterilization, clarification, and other requirements for fine filtration, activated carbon removal, particle removal, and semi fine filtration. It directly uses a microporous membrane filter, which can achieve sterile filtration without filtering through a microporous membrane filter. This machine has a large filtration area, high flow rate, and a wide range of applications, so it has a wide range of uses in industries such as pharmaceuticals, chemicals, and food. It is widely used in the filtration of injection drugs in pharmaceutical factories and has excellent results.

Application of stainless steel plate frame multi-layer filter

Structural features:
Except for the motor, all other components of this machine are made of high-quality corrosion-resistant stainless steel materials such as 304 or 316L, which are suitable for filtering various pH acid and alkali solutions. This machine applies pressure sealed filtration, with low loss of filtrate, good filtration quality, and high efficiency. The filtration section consists of ten layers of filter plates, with a large filtration area and high flow rate; And according to the different production processes (initial filtration, activated carbon removal, particle removal, semi fine filtration, fine filtration) requirements of the filtered solution, different filter membranes can be replaced, and the number of filter plate layers can be appropriately reduced or increased according to the user's production flow rate to meet production needs. Therefore, this machine has the characteristic of being versatile and widely applicable; The filter plate adopts a flat threaded mesh shape with advanced structure, no deformation, easy cleaning, which can effectively increase the service life of various filter membranes, thereby reducing and saving production costs. The stainless steel infusion pump equipped on this machine has a small motor and low power consumption. The machine base is equipped with rubber wheels, which are easy to operate and flexible to move, and can be used for mobility. (This machine has the same specifications, model, number of layers, and flow rate as the old model, which is 2T/h-3T/h. This machine has been produced with models TYY-200 and TYY-300-TYY-400.).

Technical Specifications

model	Specification (mm)	number of layers	Filter area (M)²）	Membrane pore size (um)	Filter pressure (Mpa)	Water flow rate (T/h)	Motor power (Kw)	Dimensions (mm)	Import (mm)	出口（ mm）
TY	F100	10	0.078	0.8	0.15	0.8	0.55	600×300×600	15	15
TY	F150	10	0.170	0.8	0.15	1.5	0.55	650×380×650	20	15
TY	F200	10	0.314	0.8	0.15	2.0	0.55	650×400×700	20	15
TY	F300	10	0.7	0.8	0.2	4.0	1.10	700×500×800	25	20
TY	F400	10	1.25	0.8	0.2	6.0	1.10	900×600×1000	38	25
TY	F400	16	2.0	0.8	0.3	9.0	1.50	1000×600×1000	38	25
TY	F400	20	2.5	0.8	0.3	10	1.50	1100×600×1000	38	25
TY	F400	24	3.0	0.8	0.3	12	2.20	1200×600×1000	38	25
TY	F400	32	4.0	0.8	0.3	14	2.20	1320×600×1000	45	25
Note: Customization is available if the area needs to be increased. The booster pump requires an explosion-proof motor and a Grundfos pump to compensate for the price difference. For floors 24 and above, double inlet and double outlet increase the flow rate. This horizontal plate and frame filter can process up to 60 layers and uses hydraulic pressure.

Specifications and reference data

Model	number of layers	Filter area (m)²）	Filter media pore size (um)	Flow rate (t/h)	Pump motor power
TY-1-200*200	10	0.4	0.8	3	1.1
TY-1-300*300	10	0.9	0.8	5	1.1
TY-1-400*400	10	1.6	0.8	8	1.1
TY-1-400*400	20	3	0.8	12	1.5
TY-1-400*400	26	4	0.8	14	3
TY-1-400*400	32	5	2.0	16	3
TY-1-450*450	38	6	2.0	18	4
TY-1-450*450	50	8	2.0	20	4
TY-1-450*450	62	10	2.0	22	4
Note: (1) Filter presses with large filtration areas can be customized; (2) The booster pump requires an explosion-proof motor to increase the differential price