BINDER VD series vacuum drying oven VD23 VD53 VD115

Product Introduction

The binder company, located in Tuttlingen, southwestern Germany, specializes in the research and production of laboratory temperature control products. Its APT.Line internal preheating technology achieves a very uniform distribution of temperature inside the box, changing the bottleneck of upper and lower temperature difference that traditional preheating systems have been difficult to overcome. The binder temperature control box is widely used in the fields of pharmaceuticals, food, materials science, cosmetics, tobacco, microbiology, chemical engineering, electronics, etc. It is undoubtedly one of the largest and most professional manufacturers of temperature control boxes in the world.

The binder VD series vacuum drying oven is a vacuum drying oven with safety protection performance, using APT.Line^@The extended shelving technology ensures precise temperature regulation of the drying technology and balanced and stable temperature distribution inside the chamber, providing a basic guarantee for the effectiveness of the equipment. Unique APT.Line^@Pre heating technology ensures uniform temperature inside the box, effectively preventing condensation on the walls and preventing the condensation of corrosive gases, ensuring excellent corrosion resistance. By adopting a new type of inert gas cross flow technology, it can ensure that the inert gas fills the entire cavity, thereby achieving a very balanced drying effect and greatly reducing the drying time.

BinderThe outstanding advantages of vacuum drying oven

APT.Line^@Internal preheating technology

Binding Core Technology - APT.Line^@Air jacket technology and extended shelving technology

Binder VDTechnical characteristics of series vacuum drying oven

1) Electronic controlled APT Line^@Internal preheating technology and two extended shelves;

2) Temperature range: Room temperature+5 ℃ to 200 ℃ (optional up to 250 ℃);

3) MP program controller, with 2 programs (10 sections each) or switchable to 1 program (20 sections);

4) The interval time between each section of a single program can be adjusted to a maximum of 99:59 hours or 999:59 hours, which is suitable for all sections of the program;

5) The heating rate can be adjusted through a program editor;

6) Tested time timer;

7) Precise quantitative ventilation valve;

8) Equipped with explosion-proof spring safety glass door;

9) Using cross flow technology and precise quantitative gas supply valve to connect inert gas;

10) Independent adjustable temperature safety device, level 2 (DIN 12880), with visual and audible alarms;

11) Rear diameter 60mm measurement interface;

12) Simulated pressure gauge (displaying the pressure difference between the internal cavity and the surrounding environment);

13) The inner cavity of electrolytic polishing;

14) All suction and ventilation pipes, as well as pressure vessel valves, detachable shelving slots, and vacuum valves welded internally, are made of corrosion-resistant stainless steel material 1.4571 (V4A)/AISI 316Ti;

15) The sealing gasket of the box door is made of tempered silicon material;

16) 2 stainless steel shelves;

17) RS 422 interface, used for communication software APT-COM^@Data control system; Or use the RS 232/RS 422 interface converter to convert to the printer output port;

BinderComplete solution for vacuum drying oven with vacuum module

BinderThe complete solution with vacuum module includes:

1) A matching single source solution consisting of a vacuum drying oven with one vacuum pump

2) Space saving, low-noise, modular vacuum unit

3) Simple and user-friendly condenser inlet

4) A technically evaluated and validated solution that is easy to launch and operate

5) Time saving, programmable mid stage venting and two-stage drying

Binder VDTechnical specifications for series vacuum drying oven