Black Sesame Ball Machine

Black Sesame Ball Machineworking principle

Send the evenly mixed and refined medicinal paste intorolling machineIn the hopper, the medicine strip is extruded from the side nozzle under the action of the pusher by flipping and squeezing through the flipping plate. When the medicine strip reaches a certain length, it is cut by an automatic cutter and then fed into the rolling mill by the distributor at a speed of once per second. By adjusting the strip making speed and strip pulling speed arbitrarily, the length of the medicine strip can be controlled, making the operation simple.

Black Sesame Ball MachineTechnical Features

1. Reasonable structure, stable performance, low noise, and simple operation. Easy maintenance and cleaning, high production efficiency, overall made of stainless steel, in compliance with certification requirements.

2. For pills with different diameter specifications, simply replace the rolling roller.

3. The pill making roller is made of special materials that meet GMP certification requirements, with easy loading and unloading, no pollution, and long service life; The rolling roller is treated with special technology and does not stick to medicine. It does not require alcohol, powder or oil to produce pills that are shiny, round and shiny.

4. The produced pills are molded in one go, with uniform size and small differences in pill weight. The yield rate is over 98%, and the disintegration is good, meeting the standards of the National Pharmacopoeia.
5.It can produce 3, 6, and 9 grams of large honey pills, and can also produce various specifications of water pills, concentrated pills, and paste pills after changing the mold.

Detailed explanation of operation steps

preparation:

Material preparation: Mix black sesame powder, honey, walnut kernels and other auxiliary materials evenly according to the formula. The dry humidity and viscosity of materials are crucial. Too dry makes it difficult to form, while too wet makes it easy to stick to the mold and deform. The ideal material state is to hold it in a ball and gently press it to disperse.

Equipment installation: Install a mold (die head) with a suitable aperture and a rolling disc according to the required size of the meatballs.

Cleaning inspection: Ensure that the parts in contact with the material, such as the hopper, mold, and disc, are clean and dry.

Start up and run:

Power on: Turn on the main power switch.

No load test run: Start the machine with a jog or low speed without feeding, observe whether it runs smoothly and has no abnormal noise.

Feed production:

Slowly pour the mixed materials into the hopper.

Activate the squeezing and rounding functions.

The material is extruded by a screw propeller and uniformly extruded into strips from the mold holes.

The strip material is cut into cylindrical particles of uniform size by the cutting blade below.

The particles fall into the rolling disc (or rolling drum) and are rolled into smooth round balls during the rotation process.

Adjustment:

Maru weight adjustment: By adjusting the speed or frequency of the cutting blade to change the length of the cutting section, the weight of the meatballs can be controlled. The faster the speed, the smaller and lighter the meatballs; The slower the speed, the larger and heavier the meatballs.

Roundness adjustment: Check the angle and pressure of the rubbing disc to ensure a smooth and uniform rounding effect.

Collect finished products: Use a clean tray to catch the prepared black sesame balls at the pill outlet.

Production completed:

Stop feeding: At the end of production, stop feeding the hopper first.

Empty the remaining material: Let the machine continue to run until all the residual materials in the hopper and mold are discharged.

Power off: Turn off the power switch of the device and disconnect the main power supply.