Carbopol high-speed colloid mill

Carbopol high-speed colloid millCarbopol polymer colloid mill, Carbopol high shear colloid mill, Carbopol German colloid mill, Carbopol pipeline colloid mill, Carbopol imported colloid mill, ultrafine colloid mill, SGN colloid mill

Carbopol high-speed colloid millCarbopol polymer colloid millEfficient, lightweight, with a modular structure, easy to operate, and capable of long-term operation, it can easily meet various high requirements for dispersion and emulsification experiments. It can simulate online working conditions in the laboratory for cyclic or continuous processing, and has the characteristics of efficient homogenization without dispersion dead corners.

Carbopol is an acrylic acid bonded allyl sucrose or penterythritol allyl etherHigh molecular weight polymer. Calculated as a dry product, the chemical formula containing carboxylic acid groups isCOOHThe proportion should be56%～68%.It is also a very important type of rheological regulator, and the neutralized Capo isYouxiuThe gel matrix has important uses such as thickening and suspension. It has simple process and good stability and is widely used in lotion, cream and gel.

Carbopol is used in emulsifiers:Can be prepared:Moisturizing cream, lotion, cleanser, sunscreen, alcohol free perfume, essence conditioner(Enhance gloss and make it easy to comb), hand sanitizer, low consistency spray emulsion and transparent microemulsion, etc. There are many methods to reduce the difficulty of applying carbomer, one of which is to add carbomer to the oil phase system to slow down its swelling rate, known as the indirect method, but this depends on the formula. Carbopol is not very sensitive to changes in the addition process.

Carbopol is used in skincare products:Hydrophilic thickener, stabilizing emulsifier, suspending agent and gel agent have good transparency, and only moderate to weak alkalinity is required for consistency, so they cannot coexist with acid skin activating ingredients. In additionCarbomerI am also afraid of salts, so I cannot add mineral ions, otherwise the consistency will disappear and it will be irritating to the eye mucosa.

SGNColloidal mill is a mechanical device used for fine processing of fluid materials. It combines various mechanical properties such as homogenizers, ball mills, three roll machines, shearing machines, mixers, etc., and has the functions of ultrafine grinding, dispersion emulsification, homogenization, mixing, etc. After processing, the particle size of the material reaches2～50Microns, with homogeneity of up to90%The above is an ideal equipment for ultrafine particle processing.

Carbopol polymer colloid millThe outstanding advantages in design are:

1Rotation speed14000rpmCompared to other manufacturers2900Turning left and right is about three times higher:

2The grinding head structure is more precise and has * design,Make the grinding force greater and achieve better results.

3The double end mechanical seal imported from Germany has a unique structure and special materials to ensure high-speed operation and long service life.

4TheGM2000/4The configuration of the pilot mill is basically the same as that of the large-scale industrial pipeline production model. The types and corresponding line speeds of various working heads are the same, and the process parameters during the pilot process do not need to be readjusted after industrialization, thereby reducing the risk of upgrading the machine model to the industrial process.

Key points for selecting models of colloid mills:

It is advisable to use a circulating tube for crushing dilute materials, which can automatically and repeatedly process the materials and facilitate the connection between upper and lower processes.

It is advisable to use a direct outlet type with a scraper for crushing viscous materials.

High hardness teeth are recommended for crushing hard materials. The high hardness tooth colloid mill adopts a special process method, and the grinding hardness can reach HV1400-1600.

The grinding and processing of ordinary architectural coatings and casting coatings can be carried out using coating mills. The grinding seat of the coating mill is made of carbon steel material, and the price of the coating mill is low.

SGNColloid mill selection table: