Elektrophysik (EPK) GalvanoTest 2000 Coulomb Thickness Gauge from Germany

NegotiableUpdate on 02/09

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

GalvanoTest是基于库仑原理测量涂层厚度的设备，几乎可用于所有电镀单层或多层涂层。铬，镍，镉，铜，黄铜，银，金，锡，锌等电镀层可以在金属或非金属上测量。德国EPK生产库仑电解膜厚仪主要是针对一些塑料、薄膜等行业的一些电镀件，比如说，塑料上镀锌、镀银、镀铜等，GALVANOTEST 2000可以测试单层或多层镀层的厚度。电解膜厚仪也叫库仑镀层测厚仪。

Product Details

Product Description

Elektrophysik (EPK) GalvanoTest 2000 Coulomb Thickness Gauge from Germany-------Can be used for almost all electroplating single-layer or multi-layer coatingsGalvanoTest is a device based on Coulomb principle for measuring coating thickness, which can be used for almost all electroplated single-layer or multi-layer coatings. Chromium, nickel, cadmium, copper, brass, silver, gold, tin, zinc and other electroplated coatings can be measured on metal or non-metal surfaces.The Coulomb electrolytic film thickness gauge produced by Germany's EPK is mainly aimed at some electroplated parts in the plastic, film and other industries, such as galvanizing, silver plating, copper plating on plastics. GALVANOTEST 2000 can test the thickness of single-layer or multi-layer coatings. Electrolytic film thickness gauge, also known as Coulomb coating thickness gauge.

There are two models of Galvano Test:

GalvanoTest 2000The electrolyte is driven by a pulsating nozzle

GalvanoTest 3000The large amount of electrolyte capacity driven by the circulation pump can be quickly and continuously measured. Suitable for very small parts and measuring gold layers.

The anodic dissolution method, also known as Faraday Coulomb method, works in the electroplating process: a single metal coating is separated from the substrate by the current of the electrolyte.

The Galvano test determines the thickness of the separated coating by measuring current and time.

Measurement range: 50 nm-75 μ m/0.002-3 mil.

GALVANOTEST 2000 productdescribe

GALVANOTEST 2000The characteristics of the instrument are:

All coatings that can be tested for practical applications

Using Coulomb coulometric analysis principle to measure coatings and multi-layer coatings

Complies with international standards:DIN EN ISO 2177

GALVANOTEST 2000 measurement principle:

Measure according to Faraday's principle. The process is similar to electroplating, but the direction of the electrochemical reaction is opposite, which is electrolytic plating.

According to the coating/The combination of the substrate and the selection of electrolyte injection into the electrolytic cell. Place the electrolytic cell on the test sample.

A sealing gasket is embedded between the electrolytic cell and the tested sample, which serves to determine the measurement area, for example1mmThe second is to prevent electrolyte leakage.

Electric current passes through the electrolyte and produces electrochemical reactions over a certain area. The thickness of the coating is directly displayed on the digital monitor.

technical parameter

GALVANOTESTThe Coulomb coating thickness gauge can measure	2000	3000
Can measure70More than one plating layer/Matrix combination	●	●
Can measure coatings on flat and curved surfaces	●	●
Can measure small parts, wires, and linear parts	●	●
preset10Measurement parameters for different metals:CrChromiumNiNickelCuCopper, brassZnZincAgSilverSnTinPbLeadCdCadmiumAuGold (requires sample confirmation)		●
preset9Measurement parameters for different metals:CrChromiumNiNickelCuCopper, brassZnZincAgSilverSnTinPbLeadCdCadmium.	●
Users can set it separately8Measurement parameters of metals		●
Users can set it separately1Measurement parameters of metals	●
Measurement institution:
Equipped with a circulating pump		●
Equipped with an air pump	●
Measurement area:
a seal8mm2	●
a seal4mm2	●	●
Sealing sheet1mm2	●	●
Sealing sheet0.25mm2(The coating area is almost too small to be seen)		●
Electrolytic cup0.25-16 mm2(Optional)	●	●
Optimization and adjustment of measurement parameters:
Plating speed0.3-40μm/Minute adjustable	●	●
The coefficient can be directly adjusted based on the metal and measurement surface	●	●
Calibration with available thickness standard template	●	●
Adjustable terminal voltage to resist interference and adapt to coating/Alloy between matrices	●	●
GALVANOTESTData storage of Coulomb coating thickness gauge
The number of different metal measurement parameters that can be stored	10	18
Storable readings and statistical values	2000	2000
After the instrument is powered off, all calibration values, readings, and statistical values can be maintained.	●	●
Statistical calculation:
display6Statistical values: mean, standard deviation, coefficient of variation, large and small values, number of readings	●	●
Display statistical values immediately or later	●	●
Print readings and statistics immediately or later		●
Display and print year, month, day, hour, and minute	●	●
Computer interface for peripherals:
MINIPRINTMini printer interface	●	●
RS-232，PCcomputer interface	●	●
connectx-tAnalog voltage output interface of recorder	●	●
Electrolyte saturation alarm indication		●
Measurement uncertainty:
5%, in8mm2Under the area, calibrated	●	●
Power Supply:
110/220V，50/60HZ，10W	●	●
Size and weight:
Measurement range:0.05-75μm	●	●