FL-5PFluid bed granulator

control system

The equipment operates using programmable logic controllers (PLCs) and industrial tablets, and is operated through a human-machine interface. The main electrical components are branded, with a high degree of automation, combined with professional software for fast response, high reliability and stability, strong scalability, detailed parameter settings, multiple control key points, and high accuracy of actual parameters. The interaction between machinery, operators, and programs is friendly, safe, and reliable.

Technical Specifications

1. Container diameter: 400mm

2. Granulation container volume: 21L

3. Granulation capacity: 2-5KG/H

4. Fan power: 5.5 KW 380V

5. Working temperature: room temperature -100 ℃, control accuracy required to be controlled within ± 1 ℃.

6. An anemometer is installed on the intake duct to display the real-time intake air volume for intuitive air volume control.

7. The filtration chamber adopts a dual chamber structure, and the shaking bag cylinder and exhaust butterfly valve work in a time-sharing manner. The shaking bag cleaning is alternately controlled by PLC, and the time and frequency can be set and adjusted. The shaking bag cylinder can be kept in the working position for 8 hours after shutdown and gas interruption.

8. The filter bag adopts a support ring sealing method, with the upper end suspended on the shaking bag frame through a snap fastener and the lower end wrapped around the support ring frame, ensuring good sealing effect and no powder leakage problem; The disassembly and cleaning of filter bags are convenient and fast.

9. Equipment configuration: 19 inch industrial tablet PLC、 Electrical components.

10. Provide batch management, batch recording, and batch reporting functions, which can trace detailed information of produced materials.

11. Provide multiple data combination analysis and trend curve comparison analysis functions.

12. The software system has the function of electronic recording and electronic signature.

13. The equipment has a periodic maintenance plan function, which can be prompted by the system to perform equipment maintenance in advance.