Fully automatic softening water equipment

Fully automatic softening water equipment

The fully automatic water softener is composed of a fully automatic water softener controller (Fulike, USA), resin tanks (usually fiberglass resin tanks and stainless steel resin tanks), strong acid sodium ion cation resin, and a salt tank. The fully automatic softened water equipment has the characteristics of small size, simple operation, and automatic operation without manual operation. It has been widely used in industrial or civilian systems such as boilers, cooling circulating water systems, etc. in petrochemicals, steelmaking, steel rolling, large transformers, light industry textiles, food hygiene, hotels and restaurants.
Standard Workflow

There are five processes: work (sometimes called water production, the same below), backwashing, salt absorption (regeneration), slow flushing (replacement), and fast flushing. All processes of different softening water equipment are very similar, but there may be some additional processes due to differences in actual processes or control needs. Any softening water equipment based on sodium ion exchange is developed on the basis of these five processes (among which, the fully automatic softening water equipment will increase the saltwater re injection process).

Introduction to Automatic Controllers

Performance characteristics of (Fulaik) centralized control valve:

PENTAIR's piston type valve core not only has excellent hydraulic performance, but also is sturdy, wear-resistant, and corrosion-resistant. The lead-free brass valve body is non-toxic and harmless, with a long service life.
2. The valve core has a clever design. The core part composed of pistons, sealing rings, and partition grids not only has good hydraulic performance, but also is sturdy, wear-resistant, and corrosion-resistant. The brass valve core is firmly covered with a layer of low friction and wear-resistant polytetrafluoroethylene surface layer,. These characteristics make the performance of the control valve reliable and have a long service life.
3. The regeneration program can be automatically started according to the flow rate setting. The operator only needs to add salt to the salt tank regularly, and the rest of the work is automatically completed by the soft water equipment. The equipment has a low failure rate, long lifespan, and can ensure 100% good water quality.
4. The periodic water production can be adjusted freely, and the time for each regeneration step can be flexibly adjusted.

Three

1. High degree of automation and stable operating conditions.
2. Advanced program control device, operates accurately and reliably, replaces manual operation, and achieves automatic conversion of various links in water treatment.
3. High efficiency, low energy consumption, and economical operating costs. Due to the reasonable overall design of the softener, the exchange capacity of the resin can be fully utilized. The equipment adopts a jet type salt suction instead of a salt pump, reducing energy consumption.
4. The equipment has a compact structure, occupies a small area, saves infrastructure investment, is easy to install and debug, is easy to use, and has stable performance of operating components.

Four

Power supply: 220V/50Hz
Power: 10-35W
Water production rate (single machine): 0-50m3/h
Work pressure: 0.2-0.5MPa
Working temperature: 2-50 ℃
Inlet hardness: ≤ 8mmol/L
Water hardness: ≤ 0.03mmol/L
Operating Procedure: Automatic Program Control
Valve body material: high-strength plastic or lead-free copper alloy
Tank material: wrapped fiberglass or carbon steel for internal anti-corrosion and stainless steel
Control mode: Time type and flow type or no power hydraulic drive type
Layout form: Single tank or multiple tanks in parallel
Regeneration method: co current/counter current regeneration
Interface form: pipe thread/ABS flange
Ionic resin: Strong acidic cation exchange resin
Reclaimed water consumption: ≤ 2% x water production
Salt consumption: ≤ 160g/l
Installation conditions: No separate equipment foundation is required, generally a flat cement floor is sufficient, and drainage ditches or outlets should be set up within 1 meter around the equipment.

Five【Fully automatic softening water equipmentOverview of Specifications