German Nix QNIX1200 Coating Thickness Gauge

product description

The QNIX1200 adopts an integrated design, requiring only zero adjustment and no calibration, making it easy to use. It can be used to measure coatings and coatings on magnetic substrates such as steel and iron. Easy to operate, convenient to carry, high precision, probe and body are designed at a 90 ° right angle, which can meet the measurement needs of some small spaces (such as pipeline walls) and is loved by a large number of users.When using the instrument for the first time, working on different materials, installing new batteries, or continuously operating the instrument, the instrument needs to be reset to zero. When zeroing, the probe of QNix1200 should be placed on the corresponding zeroing board, or on the workpiece before spraying. Press the probe vertically on the surface of the zeroing board, push either switch on both sides, and the instrument will make a 'drip' sound. Release the switch, lift the instrument up, and zeroing is complete. After zeroing the instrument, the zeroing board should display 0. If the displayed value is too large and exceeds the allowable error range of the instrument, zeroing will fail. Please repeat the zeroing steps above.

Product Features	QNIX1200 measurement range
1. Just needZero adjustmentNo calibration required 2. VolumeCompactEasy to operate,automaticIdentify the substrate 3durableThe ruby probe and sturdy casing 4. All of themtemperature compensationTechnology makes data more accurate	The measurement range is 0-2000 μ m or 0-100mil Instruments without storage function can switch between measurement units by simultaneously pulling the switches on both sides. When the device is turned on, simultaneously push the switches on both sides forward and hold them for one second at a time to switch units. When the instrument is in storage mode, it can be converted from μ m to mil through corresponding program software.