HXSB-98 top impact vibrating screen machine

HXSB-98 top impact vibrating screen machine

Main technical specifications for top impact vibrating screen machine:

Main structural description of top impact vibrating screen machine

It is mainly composed of a machine base, an upper cover, a rotating mechanism, a vibration mechanism, a clamping mechanism, and a screening sleeve.

Top impact vibrating screen machine lubrication system

This structure has simple lubrication, with all bearings lubricated with grease and butter, while the lubrication of gears, copper sleeves, and main (auxiliary) eccentric shafts is all done with fly base lubrication. It is advisable to use 3 kilograms of 20 # engine oil, and the oil nozzle (20A) can be used to add lubricating oil at the eccentric shaft to prevent it from flying off.

Automatic parking device for top impact vibrating screen machine

After the power switch of the rotating automatic parking and loading device (93B) is turned on, the timer controls the motor to run for a long time or stop running at a fixed time through an intermediate relay. In order to ensure safe operation, the motor tray of this machine is equipped with grounding screws, and users must ground it according to regulations.

Operation, use and maintenance of top impact vibrating screen machine:

Before starting up, unscrew the screw plug (155A) and add enough lubricating oil (5 kilograms of 20-4 engine oil is recommended). When installing the screen, first turn the tightening bolt (55A) to the left to loosen the fixed top rod (47A) of the screen cover, then lift it up together with the screen cover (43A), and then turn it to the right to fix it on the screen tray (62A). Then loosen the tightened bolt left and right to press it down and turn it to the right to fix it. According to the work needs, if it needs to be normally open, the knob can be rotated to the normally open position. If it needs to be timed, the knob can be rotated to the required timing position. If it needs to be stopped halfway, the power should be cut off and the timing clock should be turned to the stop position by itself. Can be forcibly twisted back.

The maintenance of this machine is simple, and the oil should be changed every 3-6 months. When using it, be careful to avoid deformation of the 7 guide rods on the cover plate.