HZK-L type microbial constant temperature incubator

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

HZK-L type microbial constant temperature incubator is a professional constant temperature equipment widely used in the fields of biology, medicine, food, agriculture, environmental protection, etc., providing a reliable experimental environment for laboratory microbial cultivation, water analysis, plant breeding, etc.

Product Details

HZK-L type microbial constant temperature incubator

Microbial constant temperature incubatorTechnical Specifications

Device Model	HZK-150L/LB/LB-S	HZK-250L/LB/LB-S	HZK-300L/LB/LB-S	HZK-400L/LB/LB-S
Studio size (mm)	500×500×600	550×500×900	600×500×1000	660×600×1000
Dimensions (mm)	760×660×1320	810×660×1620	860×660×1720	920×760×1720
Installation power	600W	650W	850W	1100W
partition	2	4	4	4
temperature range	temperature fluctuation	temperature deviation	Temperature Uniformity	voltage
10-60℃	＜±0.5℃	＜±2.0℃	＜2.0℃	220V±10%，50Hz
controller	Adopting a touch screen temperature control instrument, it integrates functions such as printing, exporting recorded data from a USB flash drive, communication, cumulative timing, and alarm prompts. (L and LB series use computer digital controllers)
heating system	Adopting nickel chromium alloy electric heating element with PID regulation.
refrigeration system	1. Adopting a fully enclosed imported compressor, it has low noise, low mechanical power consumption, and a liquid side cooling compressor, which can operate continuously and safely in high temperature environments. 2. Refrigerant: DuPont R134a (environmentally friendly refrigerant)
safety protection	Power leakage protection, short circuit protection, equipment over temperature protection, heating, compressor independent overload protection, etc.
alarm system	The L series adopts buzzer alarm, while the LB and LB-S series adopt buzzer, SMS, and telephone alarm.
Printing system	Micro needle printer, capable of printing device numbers, numerical values, or curve formats (L series does not have printing function)
Permission and Audit Tracking	Has Level 3 password access and audit trail functionality. (L and LB series do not have this function)
data storage	Equipped with a built-in 4G memory card, it can store data for about 5 years and export electronic data through a USB flash drive. (L and LB series do not have this function)
sensor	Using imported PT100

Note: The HZK-L model is controlled by a computer digital instrument and does not have printing or alarm functions.

The HZK LB model is a computer digital instrument control with printing and alarm functions.

The HZK LB-S model is a touch screen instrument control with printing, authorization, alarm, storage, and audit tracking functions.

HZK-L type microbial constant temperature incubator

Microbial constant temperature incubatorIt is a professional constant temperature equipment widely used in fields such as biology, medicine, food, agriculture, and environmental protection, providing a reliable experimental environment for laboratory microbial cultivation, water analysis, plant breeding, and more.

After sales service process:
1. Product installation, debugging, and training: Professional engineers provide free on-site installation, debugging, and product related training.
2. Warranty purpose: Timely response, prompt resolution, and ensure use.
3. Fault response: Respond within 1 hour, provide a solution within 24 hours, offer free on-site service for products within the period, and provide technical support for products outside the period.

People working in the laboratory must ensure that they are always free from any safety risks. Similarly, laboratory samples must also be adequately protected. The contamination of cultured cells is a common problem in cell culture laboratories, which cannot be completely eliminated, but can be well controlled. The direct cause is that if pollution occurs, it will have adverse consequences, waste time, money, and energy, damage precious samples/products, and produce inaccurate experimental results. It is important to reduce the frequency and severity of this phenomenon to prevent adverse consequences that may affect the health of the operator.