HZK-S type constant temperature and humidity test chamber

NegotiableUpdate on 01/04

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The HZK-S constant temperature and humidity test chamber can be widely used for temperature and humidity testing, stability inspection, and testing of raw material properties, product packaging life, and other industrial products in fields such as pharmaceuticals, biology, chemical engineering, textiles, and agriculture.

Product Details

HZK-S type constant temperature and humidity test chamber

Product Features

Humidity ChamberLong term reliable constant temperature and humidity, low-power operation, energy-saving and environmentally friendly.
Optional accessories: Temperature and humidity deviation SMS alarm, printing
Humidity ChamberThe overall appearance of the machine is beautiful and elegant, with a mirrored stainless steel inner liner inside the box and an electrostatic spray coating on the outer shell.
The door of the test box body is sealed with silicone strip, which has good insulation effect and can fully ensure no air leakage or condensation.

Specifications/Technical Parameters

Device Model	HZK-150S	HZK-250S	HZK-400S	HZK-500S	HZK-800S	HZK-1000S
Studio size (mm)	500×500×600	550×500×900	660×600×1000	660×600×1250	850×700×1350	950×780×1350
Dimensions (mm)	920×680×1320	970×680×1550	1080×780×1650	1080×780×1720	1270×880×1990	1370×960×1990
Installation power	1200W	1300W	1500W	1800W	2000W	2200W
number of partitions	2	4	4	4	6	6
temperature range	temperature fluctuation	temperature deviation	Temperature Uniformity	humidity range	Humidity deviation	voltage
15-65℃	＜±0.5℃	＜±2.0℃	＜2.0℃	40.0-90.0%R.H	＜±5.0%R.H	220V±10%，50Hz
controller	Adopting computer digital control instrument, PID control, integrating printing, warning and other functions.
temperature sensor	Using imported PT100
humidity sensor	Polymer humidity sensor
heating system	Adopting nickel chromium alloy electric heating element with PID regulation.
Humidification system	Adopting boiler type steam humidification system
refrigeration system	1. Adopting a fully enclosed imported compressor, it has low noise, low mechanical power consumption, and a liquid side cooling compressor, which can operate continuously and safely in high temperature environments. 2. Refrigerant: DuPont R134a (environmentally friendly refrigerant)
safety protection	1. Power leakage protection, short circuit protection, equipment over temperature protection, humidification system water shortage and disconnection protection. 2. Heating, humidification, compressor independent overload protection, etc.
test hole	A lead test hole with a diameter of 50mm
observation window	Adopting a hollow double-layer glass observation window.
alarm system	Adopting buzzer alarm. (Optional SMS and phone alarm functions)

HZK-S type constant temperature and humidity test chamber

In order to facilitate heat dissipation and maintenance of the enclosure, the location where this equipment is installed must meet the following conditions:

1. The distance between adjacent walls or objects is 300mm.

2. In order to stably utilize the functions and performance of the test chamber, a place with a perennial temperature of 15-35 ℃ and a relative humidity greater than 85% should be selected.

3shouldInstall in a well ventilated area.

4. It should be installed on a horizontal surface (a level should be used to confirm the level on the ground during installation).

5. It should be installed in a place without direct sunlight.

6Install as close to the power supply as possible.

7. Should be installed away from combustibles and explosivesPlaces with high temperature heat sources.

8. It should be installed in a place with less dust.

9The environmental temperature of the installation site should avoid sudden changes.