High platform quick installation three piece ball valve

NegotiableUpdate on 01/06

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Sanitary grade stainless steel high platform quick fit three piece ball valve, also known as three piece clamp ball valve, is composed of a three-stage valve body with a bolt locking in the middle. Rotate the valve ball 90 degrees to open or close the valve. Usually used for making high-pressure ball valves. Used for cutting off or connecting media in pipelines, the valve seat adopts an elastic sealing structure, which is easy to open and close and reliably sealed. Suitable for various media such as water, steam, oil, nitric acid, acetic acid, etc.

Product Details

Sanitary grade stainless steelHigh platform quick installation three piece ball valve：

:
The Q81F three piece quick release ball valve switch has a 90 degree rotation action, and the plug body is a spherical body. It is mainly used in pipelines to cut off, distribute, and change the flow direction of the medium. It only requires a 90 degree rotation operation and a small rotational torque to close tightly. Ball valves are suitable for use as switches and shut-off valves, but recent developments have designed them to have throttling and flow control functions.

:
1. The clamp connection is easy to disassemble and is suitable for working conditions that require frequent cleaning.
2. Easy to install, can be installed in any direction in any part of the pipeline.
3. The passage inside the valve body is smooth and flat, which can transport viscous fluids, slurries, and solid particles.
4. Multiple drive mechanisms such as pneumatic and electric can be configured to achieve remote control and automated operation.
5. Due to the excellent self-lubricating properties of materials such as polytetrafluoroethylene and low friction loss with the ball, the service life of ball valves is long.

Sanitary grade stainless steelHigh platform quick installation three piece ball valve：

1. Ball valves are components in pipeline systems that can quickly cut off and connect medium flow. To ensure personal and property safety, it is necessary to select the appropriate ball valve correctly and install, use, and maintain it in a standardized manner. Ball valves have internal and external threads, card sleeves, and connection forms, and are widely used in water supply, gas, HVAC, oil and other systems. The sealing test strictly follows the GB/T 13927 "General Valve Pressure Test" standard, and the factory *% pressure test is qualified.

2. The difference in axial alignment between the two ends of the valve installation pipeline should not be too large, otherwise excessive pipeline installation pressure may cause failure and damage. The accuracy and effective length of the pipe thread should strictly follow the ISO 228 standard, and the external thread should be conical pipe thread, and the internal thread should be cylindrical pipe thread standard. 高平台快装三片式球阀

3. The installation and tightening of the valve must use the corresponding torque wrench or pipe wrench, and the effective thread length should be screwed in. Do not excessively guide the top to press the inner end face, causing damage to the surface of the ball and leakage. To ensure the normal use of the valve, a filter should be installed at the inlet of the pipeline as much as possible. The threaded valve must be sealed with polytetrafluoroethylene tape or thread sealant. 高平台快装三片式球阀

4. The sealing material of the valve stem is polytetrafluoroethylene. In case of corrosion leakage, the gland can be tightened to repair the packing. To replace the packing, the medium pressure must be removed. 高平台快装三片式球阀