Horiba electrochemical measuring instrument for pH, ORP, ions, conductivity, resistivity, total dissolved solids, salinity

Horiba water quality analysis instrument

Horiba water quality analysis instrument
Waterproof pocket water quality testing penThis test pen is easy to operate and compact in structure, making it your pocket sized laboratory. It can be used anytime and anywhere. Measurement parameters include: pH, COND/TDS, Na⁺、 K^+TheNO_3^-、 Ca₂⁺、 Salt
Portable water quality measuring instrumentUsed in laboratories, on site, and anywhere else that needs to be used. Measurement parameters include: pH, ORP, ions, conductivity, resistivity TDS、 Dissolved oxygen and salinity
Desktop water quality measuring instrumentIntuitive operation, easy to use, 360 degree all-round controllability. Measurement parameters include: pH, ORP, ions, conductivity, resistivity, total dissolved solids, salinity

Horiba pen type water quality analysis instrument

1. Just press the button to calibrate and measure, and you will be informed of the time to read the results

Simple execution of measurements and indispensable calibration procedures. Read data after the smiley face symbol lights up.

2. LAQUAtwin is completely waterproof and dustproof (IP67 rating)

The test pen and sensor are completely waterproof, so they can be used anytime and anywhere without worrying about splashing water during measurement or cleaning.

3. Accurate readings of a single drop sample can be obtained in just a few seconds

LAQUAtwin uses the same testing principle as standard laboratory electrodes to press fit all components into a flat sensor chip with a thickness of less than 1 mm.

4. Suitcase is standard configuration, easy to store and carry

This compact suitcase accommodates all the items required for measurement, including standard liquids. You can attach a strip or label to the hanging hole.

5. LAQUAtwin has unique measurement options

A testing pen can provideseven kindsFlexible and diverse measurement methods. Simply choose the method that best suits your sample and requirements.

dripDrop a sample with a pipette; Can measure small amounts of 0.1 milliliters of sample. Using sample strip B, samples as low as 0.05 milliliters can be measured.

immersionWhen you are in the laboratory, you can measure the sample in the beaker. Ensure that the sensor cover slide is in the open position.

Scoop outCan be used as a spoon to test river water. Vertical spoons can come with unique sensor shields.

rubThe use of sampling strips can analyze small tracking quantities, such as wiping the surface of the skin with a sample strip soaked in pure water and measuring it.

Solid sampleFor food containing a small amount of moisture, simply place a small piece directly on the sensor for measurement.

powderThe LAQUAtwin test pen can also measure dry powder. Simply place the powder sample on the sensor and add an appropriate amount of pure water.

Paper, fabric, and filmTo test paper and fabric, we need to cut the sample into small pieces and place them directly on the sensor, then add a certain amount of pure water.

6. Easy measurement applicable to all users??

HoribaportableWater quality analysis instruments

1. IP67 waterproof and dustproof shell

Completely waterproof, the waterproof performance will not malfunction even after soaking at a depth of 1m for about 30 minutes.

2. Anti impact and anti vibration

Using polycarbonate resin * commonly used in the automotive and mobile phone industries to improve vibration resistance. *Compared with traditional ABS resin, polycarbonate has increased its impact resistance by about 2 times.

3. Strong drug resistance

Polycarbonate has strong drug resistance and can be directly wiped clean with alcohol.

Regarding alcohol and weak acids? Alkali and oil are stable and do not react

4. Compact ergonomic design

The measuring instrument is easy to carry and comes with electrode hooks, allowing up to 2 electrodes to be hung on both sides of the measuring instrument. The electrode bracket of the accessory makes it easy to operate and use the handheld host on the desk. The freely rotating electrode holder can be adjusted up, down, left, and right with one hand.

5. Extend operation time

Compared to traditional measuring instruments, it uses about 10% of electricity. With a lifespan of up to 1000 hours, it can also be safely used outdoors.

6. One handed operation

The body is compact and suitable for holding. Only three basic operation buttons are needed to achieve one handed control.

7. Automatic hold or automatic stability function

In auto hold mode, the measuring instrument freezes its reading when it stabilizes.

The automatic stability mode continuously refreshes the reading on the LCD display screen (with stability indicator).

8. Large LCD display screen

The ultra large 64mm × 52mm display screen facilitates clear viewing of readings and diagnostic information.

A large LCD screen with backlight, which can easily read measurement values even in dark places.

9. Various data processing methods

The built-in memory can store 1000 measurement results and can also be connected to a computer to directly read measurement data. Printer output data that complies with GLP/GMP standards.

Horiba desktop water quality analyzer

1. Intuitive operation, easy to use

• Touch sensitive operation panel; Large display screen -5.5 inches
• Chemical resistant glass panel with scratch resistance; Comes with protective cover
• Small footprint -170 (length) x 174 (width) x 73 (height) mm

2. 360 degree all-round controllability

• The lightweight electrode holder can be placed separately or integrated with the measuring instrument.
• The electrode holder base can be used as a portable platform for placing beakers.
• The height adjustment block controls the vertical sliding of the electrode holder arm.
• We can also provide a raised electrode holder (650 mm) with a telescopic shaft installed

3. Electrode status

• After each calibration, the electrode conditions can be updated and the stored information can be viewed at any time.
• If the electrode is damaged during use, an alarm will be triggered.
• Programmable calibration reminder.

4. Stability function is beneficial for archiving

• Fuzzy logic determines when the measurement value stabilizes and locks the reading on the LCD display screen

5. Diagnostic information

• The measuring instrument diagnoses and reports errors at different stages.
• Up to 10 error codes are available for troubleshooting specific faults.

6. Data management

• Internal memory with indexed data
• Use the Auto Log function to automatically record measurement values into memory
• Sample ID enables simpler sample queries
• Output date/timestamp with real-time clock * to printer, computer, or USB drive*
• RS232C or USB * for data output

7. Wide measurement range, single measuring instrument for measuring EC/TDS/Res/Sal

8. Automatic calibration; Multiple calibration points

9. Preset TDS calibration curve; Preset salinity calibration curve

10. Robust conductive battery structure

Horiba water quality analysis instrumentordering information