Manufacturer of high and low temperature wet heat test chamber for drugs

NegotiableUpdate on 01/10

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The drug high and low temperature wet heat test chamber manufacturer is suitable for stability testing of drugs and new drugs in pharmaceutical enterprises, meeting the technical conditions of accelerated testing, long-term testing, and high and low temperature wet heat testing specified in GMP principles.

Product Details

Manufacturer of high and low temperature wet heat test chamber for drugs

Drug high and low temperature damp heat test chamberInstallation site:

The ground is flat and well ventilated
There is no strong vibration around the device
There is no strong electromagnetic field around the equipment
There are no flammable, explosive, corrosive substances or dust around the equipment
Leave appropriate space for use and maintenance around the equipment

Drug high and low temperature damp heat test chamberProhibited:

Testing and storage of radioactive material samples;
Testing and storage of highly toxic substance samples;
The testing or storage of samples that may produce the above-mentioned substances or objects during the testing or storage process.
Testing and storage of samples of flammable, explosive, and volatile substances;
Testing and storage of corrosive substance samples;
Testing or storage of biological samples;

Power supply conditions	Power supply: AC220V ± 10%, 50 Hz, protection ground wire grounding resistance less than 4 Ω;
ambient temperature	5℃～35℃。
Humidification water	Using purified water, distilled water, and deionized water.
ambient humidity	≤85%RH

The freezing problem in the walk-in high and low temperature laboratory? We can solve it through the following multiple levels:

1. Check if the body is sealed, and if there is a leakage area, seal it with silicone rubber.

2. Install a heating device on the internal air conditioning evaporator and set the defrosting time.

3. The defrost setting when the refrigeration unit resumes using the high temperature caused by the refrigeration compressor. In high and low temperature laboratory experiments, if the temperature of the test object is lower than the moisture content of the environmental test chamber, condensation conditions will occur. The key conditions for condensing water in a walk-in high and low temperature laboratory are as follows:

1. The working temperature exceeds 30 ° C and the operating environment humidity exceeds 60% RH.

2. The environmental humidity ranges from low to high, and the temperature ranges from low to high.

3. The temperature changes from low to high.

Manufacturer of high and low temperature wet heat test chamber for drugs