Medical stainless steel activated carbon filter

Medical stainless steel activated carbon filter

Working Principle:

A layer of balanced surface concentration is formed on the surface of activated carbon particles, and then organic impurities are adsorbed into the activated carbon particles. The initial adsorption effect is very high. But over time, the adsorption capacity of activated carbon will weaken to varying degrees, and the adsorption effect will also decrease accordingly. If the water quality in the aquarium is turbid and the organic content is high, the activated carbon will quickly lose its filtering function, so the activated carbon should be cleaned or replaced regularly. The particle size of activated carbon also affects its adsorption capacity. Generally speaking, the smaller the activated carbon particles, the larger the filtration area. So, powdered activated carbon has a large surface area and good adsorption effect, but it is easy for powdered activated carbon to flow into the aquarium with water, which is difficult to control and rarely used. Granular activated carbon is commonly used because it is difficult to flow during particle formation and impurities such as organic matter in water are not easily blocked in the activated carbon filter layer. The adsorption capacity of activated carbon is directly proportional to the contact time with water, and the longer the contact time, the better the filtered water quality. Attention: The filtered water should slowly flow out of the filter layer. New activated carbon should be washed clean before use, otherwise black water will flow out. Before installing activated carbon into the filter, a 2-3 centimeter thick sponge should be added at the bottom and top to prevent large particles such as algae from penetrating. After 2-3 months of use, if the effectiveness of activated carbon decreases, new activated carbon should be replaced and the sponge should be replaced regularly.

Application scope:

Widely used in food, medicine, electronics, chemical industry, industrial wastewater, etc.

Stainless steel activated carbon filterA filtering device for tank bodies, typically made of stainless steel SUS304 or SUS316L shell and filled with activated carbon inside, is used to filter free substances, microorganisms, and some heavy metal ions in water, and can effectively reduce the color and odor of water. The main function of activated carbon filters is to remove large organic molecules, iron oxides, and residual chlorine. This is because organic compounds, iron oxides, and residual chlorine can easily poison ion exchange resins, while residual chlorine, cationic surfactants, and other substances not only poison the resin but also damage the membrane structure, rendering reverse osmosis ineffective.

Medical stainless steel activated carbon filter

The company's main products include bag filters, precision filters, titanium rod filters, duplex filters, jacket filters, trolley filters, activated carbon filters, gas filters, flat filters, stainless steel multi-layer plate frame filters, stainless steel barrels, stainless steel cabinets, folded filter cartridges, titanium rod filter cartridges, stainless steel filter cartridges, melt blown filter cartridges, wire wound filter cartridges, filter bags, filter membranes and other filtration equipment consumables.