Medical sterile homogenizer

NegotiableUpdate on 01/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Medical sterile homogenizer $n High pressure homogenizer, also known as "high-pressure fluid nanohomogenizer", can make suspended materials flow through a special internal structure chamber (high-pressure homogenization chamber) at high speed under ultra-high pressure, causing a series of changes in physical, chemical, structural properties, etc. of the material, ultimately achieving homogenization effect.

Product Details

Medical sterile homogenizer

Installation requirements for homogenizer on site

1. Each homogenizer needs to be filled with mechanical lubricating oil (there should be no oil in the transportation equipment), model: Great Wall Xuneng medium load air compressor oil L-DAB150. The amount of refueling varies for each model, please contact the equipment sales consultant for inquiries.

2. It is recommended to have a reflux pipe for the discharge of the homogenizer, as it takes 1-3 minutes from the start of the homogenizer to the completion of pressurization, during which the material is not homogenized.

3. Before feeding into the homogenizer, the material needs to be filtered (it is recommended to use a 100 mesh dual filter).

4. If the flow rate of the homogenizer is greater than or equal to 5 tons per hour, a flushing pipe needs to be added to the inlet and outlet. (Reduce pipeline vibration caused by high flow)

5. The homogenizer is not equipped with cables at the factory (the distance between the homogenizer and the distribution cabinet cannot be estimated due to different production conditions of each customer), so it needs to be self powered (with forward and reverse rotation).

6. There should be a spoiler at the bottom outlet of the homogenizer feed tank to prevent vortices and air from entering the homogenizer. It is recommended to leave the feed at the top of the tank along the tank wall (this can minimize material foaming).

7.Suggest installing a safety valve for the discharge pipeline (pressure of 6Mpa is sufficient).

8. The base of the homogenizer can be rotated and adjusted (without horizontal requirements).

9. Before feeding into the homogenizer, a conveying pump (with a flow rate 1.5 times that of the homogenizer and a head greater than 36 meters) is required. It is recommended to use a rotary pump. For special high viscosity materials, please consult the sales consultant.

Medical sterile homogenizerTechnical Specifications

Model number		JZH
Rated flow rate: L/H		0-35 tons (customized)
Flow rate at 0MPa: L/H		0-35 tons
Flow rate at 100MPa: L/H		0-35 tons
Maximum pressure: Mpa		0-180（定制）
Continuous working pressure: Mpa		0-150（定制）
pressure		First level, second level (customized)
Default ABB	Variable frequency drive brands are optional		Model: TBD
motor (Customizable explosion-proof)	Power: KW	0-300
	brand	Joint ventures, domestic brands, etc
CIP disinfection is suitable for standards		NaOH 2% HNO3 1.5%
Feed pressure: bar		2 ~ 5
Feed viscosity: cP		≤20000
Overall dimensions: m		定制
Weight: kg		定制
Inlet size mm		定制
Discharge port size mm		定制
Cooling water usage		Approximately 160kg per hour
High pressure homogenization head		Hard alloy, ceramic, diamond, etc
check valve		Si Taili and others
Pump body material		316L, SAF2205, etc
Piston material		Special steel, coatings, ceramics, etc
Maximum noise level during operation		96 decibels (main motor)
Brand of main components of hydraulic system	double pump	Mazuqi, Italy
	proportional valve	Wanfule, Switzerland
	fuel tank	Reggie, Germany
lubricating oil	hydraulic system	Built in system, 46 anti-wear, 8 liters
	Transmission box	Customer preparation requires approximately (0-200) liters of N150 # mechanical oil, such as Great Wall Xuneng L-DAB150 hollow compressor oil, to be added to the half position of the right side window mirror
Pressure gauge (with sensor)		mhg
PLC		Siemens module, Delta touch screen
cable		customer-supplied

2. Quotation analysis (including 13% value-added tax)

4.1 Fully automatic

Model number	JZH定制
Unit price of homogenizer	RMB
Fully actuated hydraulic system	Including (fully automatic hydraulic device)
Fully automatic control cabinet	contain
Packaging fee	contain
Freight charges	contain
Total discounted unit price	RMB

3 Payment Methods

Prepay 30% and pay an additional 70% before shipment.

4 Supply period

Received 50 days of advance payment.

5 Service Overview

Three guarantees for one year (normal operation and use), lifetime service. The supplier shall send personnel to the site for free to debug the equipment and teach the technology.

Aseptic homogenizer