NMN-21 Micro Operator

This mechanical microcontroller is specifically developed for patch clamp: it does not require the use of hydraulic systems, springs, or motors at all. The body can absorb vibrations, so even at high magnification, problems will not occur. Based on drum shaped design, it has a high reputation as a hydraulic method and has a stable center of gravity. This method provides a stable state. The overall design is dense, so installation requires very little space. The coarse and fine tuning controllers are installed together on a dense body, with a wide range of motion: from moving micro electrodes to connecting cells in the microscope observation area.

Attachment UST-2 Solid state Universal Joint, Fixed Platform, H-1 Electrode Bracket, Allen Wrench
Rough adjustment of motion range X15mm, Y15mm,Z15mm
Full speed rotation button: 4mm
Fine tune X6mm, Y6mm,Z6mm
Full speed rotation button: 250 μ m
Minimum value: 1 μ m
Size/Weight W110D170H105mm, 930g