Oral liquid washing, drying, and filling machine

This machine is a sealing host in liquid production lines, mainly used for 10~30mlGlass bottlePlastic bottles are filled, capped, and sealed. Using linear conveying,adopt47Pump linear filling, automatic capping and capping(Or rolled lid)The bottle delivery is reliable and not easy to produce foam. Electromagnetic oscillation cap feeding, high cap rate, this machine combines filling and sealing into one, with advanced design and compact structure.

This machine is a washing, drying, and filling linkage unit for oral liquid production line, mainly used for10--30mlpull-tab lid(aluminum-plastic cap)Cleaning, drying, filling, capping, and sealing of straight tube bottles. Adopting single screw bottle feeding, pressure water flushing, hot air circulation drying, and feeding into the sealing machine mesh belt through the bottle flipping mechanism, the sealing machine adoptstwoHead filling, electromagnetic oscillation capping, three blade centrifugal capping. The unit is designed with advanced technology and compact structure.

2）Main technical parameters

Production:2000-3000bottle/time

Applicable bottles:30-50ml

Drying method: Linear hot air circulation

Drying temperature:80-140degree

Quantity accuracy:±1%

seal 口 Rate:≥99%

Reuse water consumption:0.5-0.7m³/h Stress0.25～0.3 MPa

Pure water consumption:0.5-0.7 m³/h Stress0.25～0.3MPa

Compressed air consumption:0.4-0.5m³/min Stress0.25～0.3MPa

power supply380V、50Hz three-phase four-wire system

merit Rate:15Kw

Overall dimensions:6000×1800×1650

3)Equipment working principle

The bottle washing machine in the medium speed washing, drying, and filling production line uses a bottle hopper to put bottles, a screw to put bottles, and two water and one gas flushing on the screw,

The dried bottles are conveyed into the sealing area through a mesh belt, and the filling machine sequentially sends the bottles into the sealing area through a screw conveyor20 equal parts are pulled out of the tray. Perform filling, capping, and rolling actions on the disc separately. The lid adopts a three blade forced type to ensure that the bottle cap has no pulling marks and the rolled mouth is smooth.