PP microporous membrane folding filter cartridge

NegotiableUpdate on 01/07

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

PP microporous membrane folding filter element is a deep precision filtration element made of polypropylene ultrafine fiber membrane as the core, folded and hot-melt welded. It has no adhesive, wide chemical compatibility, and is suitable for fluid pre filtration/clarification/terminal filtration. It is widely used in water treatment, food and beverage, pharmaceutical, electronics and other industries.

Product Details

PP microporous membrane folding filter cartridgeCore Basic Parameters

filtration accuracy	0.1μm、0.22μm、0.45μm、1μm、3μm、5μm、10μm、20μm、50μm	0.22 μ m/0.45 μ m is used for sterilization/terminal fine filtration; 0.1 μ m suitable for electronic grade high-purity filtration; Suitable for coarse filtration/pretreatment above 10 μ m
structural performance	Filtration area and pollutant holding capacity	The conventional effective area of 10 inches is about 0.4-0.7 square meters. The folding structure has a large pollutant holding capacity, low initial pressure difference, and high flux
Tolerance parameters	Working temperature, pressure pH	Conventional ≤ 80 ℃ (0.1MPa), positive pressure difference of 0.42MPa at 25 ℃, reverse pressure of 0.24MPa; PH tolerance of 1-13; Can be steam sterilized at 121 ℃ for 30 minutes
Dimensions	Outer diameter, inner diameter, length	Common outer diameter is 69mm and inner diameter is 28mm; Length 5 "/10"/20 "/30"/40 "; Non standard caliber (such as Φ 83/Φ 130) can be customized
Sealing and Interface	Sealing material and interface form	Sealing options include silicone/EPDM/fluororubber; The interface is flat press in type and can be customized with quick install/threaded/flange interfaces

PP microporous membrane folding filter cartridgeStructure and Material Selection

filter membrane	Polypropylene ultrafine fiber membrane	Core filter layer, three-dimensional microporous structure, intercepting impurities
Support/diversion layer	Polypropylene non-woven fabric/wire mesh	Internal and external support, ensuring folding shape and even flow guidance
Shell/Center Rod	Polypropylene (optional stainless steel lining)	Pressure resistant shaping, suitable for high-pressure working conditions
End cap/seal	Polypropylene+special sealing ring	Hot melt sealing, leak proof, compatible with different media

利飞详情_01.jpg

利飞详情_02.jpg

利飞详情_03.jpg

利飞详情_04.jpg

利飞详情_05.jpg

利飞详情_06.jpg

利飞详情_07.jpg

利飞详情_08.jpg