-
E-mail
qtsop@126.com
-
Phone
13515789697
-
Address
Sangao Industrial Zone, Wenxi Town, Qingtian County, Zhejiang Province
Product Categories
- Settling type soybean milk residue separator
- Woluo magnetic powder dewatering machine
- Double cone centrifuge
- Flocculant dosing device
- Maintenance of imported spiral centrifuge
- LWF spiral centrifugal classifier
- High speed spiral centrifuge
- Woluo centrifugal dewatering machine
- DJS microporous filter machine
- Micro porous precision filter machine
- LWD Horizontal Spiral Centrifuge
Zhejiang Qingtian Oupeng Machinery Manufacturing Co., Ltd
Principle of horizontal screw centrifugal dewatering machine
NegotiableUpdate on 02/14
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The principle of the horizontal spiral centrifugal dewatering machine - desulfurization gypsum dewatering. The core tube of the spiral pusher is made of AISI304 stainless steel, and the feeding hole of the spiral pusher cylinder adopts a segmented circular arc discharge port; Its cross-section is arc-shaped, and the segmented feeding avoids direct erosion of the spiral blades by the material, allowing the spiral to operate safely for a long period of time. The arc-shaped feed inlet ensures a more uniform flow velocity distribution when the material passes through, preventing the formation of fluid dead zones and eliminating the conditions that cause narrow crevice corrosion, thereby reducing the risk of erosion of the spiral body. By adopting an optimized variable pitch structure, the occurrence of material blockage is minimized as much as possible.
Product Details
Principle of horizontal screw centrifugal dewatering machineDehydration of desulfurization gypsum
- The spiral pusher adoptsDouble cone angle with buffer plateStructure: A BD plate is added between the two spiral blades at the front end for bi-directional compression. Due to the buffering plate, the depth of the rotary drum liquid pool is increased, the squeezing pressure between the mud cakes is enhanced, and the secondary dewatering effect of the sludge is achieved. The double cone angle ensures smooth discharge of the mud cakes, thereby improving processing capacity and reducing drug consumption.
Principle of horizontal screw centrifugal dewatering machineDehydration of desulfurization gypsum
- The drum body is a whole, with higher concentricity and less vibration compared to multi-stage connected drums, and has higher strength and stiffness, making the centrifuge have a longer service life. At the same time, reduce the disturbance to the air and lower the noise during the operation of the centrifuge.
- The clear liquid outlet is located at the large end of the drum and has a weir plate that can adjust the depth of the liquid pool. The adjustment amount of the weir plate can reach over 30 millimeters. This greatly improves the adaptability of the centrifuge, which can separate various materials with different properties.
- The main bearing seat of the centrifuge is installed on the cover plate shaft at both ends of the drum and fixed on the horizontally adjusted pad of the machine base.
The drum of the centrifuge is made of AISI304, and the slag discharge outlet is replaceable and embedded360Degree rotatableNano diamond jade (ceramic) inlay(Thickness)≥4mm），The service life is greater than 30000 hours, and the inner surface of the drum is equipped with longitudinal ribs in the flow direction to protect the inner surface from wear and tear. The drum separation liquid outlet adopts a weir with adjustable liquid layer thickness
Similar Product Recommend
