-
Phone
15921165535
-
Address
No. 418 Huajing Road, Shanzhong Science and Technology Park, Waigaoqiao Free Trade Zone, Pudong New Area, Shanghai
Product Categories
Duzhi Instrument (Shanghai) Co., Ltd
Renishaw SP600 Scanning Probe, UK
NegotiableUpdate on 02/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Renishaw SP600 probe from the UK, Renishaw's SP600 analog scanning probe series provides high-performance detection, digitization, and contour scanning functions for various coordinate measuring machines. Whether it's the REVO scanning system or the PH20 trigger mount, Renishaw's five axis system not only improves measurement efficiency and shortens production lead time, but also allows manufacturers to more comprehensively evaluate the quality of their products.
Product Details
product description
For over 40 years, Renishaw has achieved many milestone innovations in the field of industrial measurement, from innovative trigger probes and mobile repeat positioning measuring seats, to repeatable pin exchange and module scanning systems. Renishaw's innovative sensors for coordinate measuring machines (CMM) meet industry standards.The five axis measurement product series is our innovation in enhancing measurement capabilities, providing unparalleled measurement speed and flexibility while avoiding the inherent drawbacks of traditional technology that cannot achieve both speed and accuracy. Whether it's the REVO scanning system or the PH20 trigger mount, Renishaw's five axis system not only improves measurement efficiency and shortens production lead time, but also allows manufacturers to more comprehensively evaluate the quality of their products.
|
Features and advantages: 300 mm/s high-speed scanning, fast point measurement, and high-frequency responseLow force measurement greatly improves the flexibility of applications Extremely sturdy and durable design, making the systemCapable of withstanding moderate intensity collisions Low cost, excellent product lifespan (working time exceeding 50000 hours) The characteristics of low quality, high structural rigidity, and frictionless viscous vibration reduction bring excellent dynamic performance |
 |
Renishaw's SP600 analog scanning probe series provides high-performance detection, digitization, and contour scanning functions for various coordinate measuring machines.
Length: 89 mm
Weight: 172 grams
Length: 107.5 mm
Weight: 216 grams
Length: 98 mm
Weight: 299 grams
SP600
Installation: Adapter connected to clutch, tool holder adapter or coordinate measuring machine tool holder
SP600M
Installation: Renishaw automatic adsorption: PH10M PLUS, PH10MQ PLUS or PH6M
SP600Q
Installation: Install directly onto the coordinate measuring machine through the shaft sleeve installation method
Technical parameters:
|
Suitable interface |
AC1perhapsAC2Analog signal converter computer interface card (optional) |
|
Probe properties |
Three-axis measurement（X、YandZ）Linear and parallel motion in all axes |
|
measuring range |
±1 mm（X、YandZ） |
|
Beyond the range of travel |
X、Yand–ZThe shaft is protected by a mechanical structural joint |
|
resolution |
Use optionalAC2When using an interface card, it is0.1 µm Use optionalAC1When using an interface card, it is0.5 µm |
|
Spring rigidity |
The nominal value is1.2 N/mm（X、YandZ） |
|
Damping |
23 °CUsually, it is20%（X、YandZ） |
|
operation temperature |
10 °Cto40 °C |
|
power supply |
+12 Vto-12 V，5 V (±10%) |
|
Output（X、YandZ） |
Analog proportional voltage output calibration:4 Vto8.5 V/mm |
|
Needle series |
M4 |
Attachment Introduction:
SCP600It is a part of the automatic module exchange rack system,
Can enable users to define the required number of pin exchange ports and
The size and spacing of the entire exchange rack system.
According to the arrangement requirements of measuring needles for different applications, it is possible to adjust them easily
A single SCP600 with appropriate spacing is installed on the MRS crossbeam
(Available in 400mm, 600mm, or 1000mm specifications).
SCR600 is a passive needle exchange rack that does not require any electricity
Gas connection. The mechanism in the base provides more information in the direction of the probe entrance
Cheng Protection. The exchange rack can store up to four probe modules,
A system can use any number of exchange racks.
AC1 Computer Interface Card
The AC1 computer interface card is a 12 bit interface card that is easy to install,approveDirectly with
Standard probe cable connection. It executes all probespipeManage functions and update status
Information is transmitted to the host. AC1 has been created byReplace with AC2.
AC2 computer interface card
The AC2 computer interface card has replaced the 12 bit AC1 interface card. It has additional functions,
Such as 16 bit resolution, Delta Tau bus compatibility, and full PICS operation.
Similar Product Recommend
