Rotary tablet press

Product Introduction

C&C800B typeRotary tablet pressMainly used in the pharmaceutical and health food fields, it is particularly suitable for small-scale and pilot production in R&D departments. Various granular materials can be compressed into circular pieces, irregular pieces, graphic pieces, etc. And it can be specially designed according to user needs.

Main features

The average tablet weight is controlled within ± 1%;

Single piece weight difference:<0.3g ± 5% ≥ 0.3g ± 3%;

Finished product qualification rate:>99%;

The main pressure, pre pressure, and filling mechanisms adopt servo systems to achieve precise control of sheet weight, thickness, and hardness;

Production parameters such as main pressure, pre pressure, extrusion force, and filling depth can be displayed and output;

Equipped with automatic weight control, automatic rejection, and automatic load reduction function for on/off operation;

The output is continuously adjustable and can be produced using half of the stamping dies;

It has functions such as pressure overload, emergency stop, safety protection, and fault alarm.

Mechanical characteristics

The main transmission system is driven by an electric motor and a synchronous toothed belt to drive the reducer, which drives the main shaft and the punching plate to rotate. The main motor adopts a frequency converter for speed regulation;

The use of precision square worm gear reducer has a compact structure, good heat dissipation, high output torque, high transmission efficiency, and smooth operation without noise;

Adjusting the upper main pressure wheel adjustment mechanism can change the depth of the upper punch into the mold, that is, adjust the forming position of the tablet in the middle mold;

The tablet pressing process adopts secondary pressure forming;

The filling method adopts the form of forced feeding;

The body frame and punching plate combination are made of stainless steel material;

Oil containing bearings are installed in the upper and lower punching holes of the punching plate, and there are anti-seepage and dust-proof devices;

The spindle and punch plate are connected by a key, ensuring reliable and stable torque transmission;

The flushing plate is equipped with a powder suction device;

Using an electric lubrication pump to achieve automatic centralized lubrication;

The compression room is surrounded by organic glass doors, making it easy for operators to monitor production;

The tablet press room adopts a sealed structure and meets the requirements of cGMP standards.

Electronic Control Features

Adopting SIEMENS brand's main control components (servo system, programmable controller, touch screen, frequency converter, etc.), with good compatibility and high reliability;

Using German TECSIS brand pressure sensors and amplifiers to ensure accurate pressure data;

Using a pressure detection system PLC、 Touchscreen, sensors, and other components are used to display pressure, speed, output, and fault alarms;

The main motor (ABB brand) is driven by a frequency converter to achieve continuously adjustable production speed;

The human-machine interface adopts a touch screen to achieve operation control.