Sealing belt filter equipment accessories

NegotiableUpdate on 05/20

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

The sealing tape is mainly used for lubrication between the slide table and the belt. The material is mainly composed of polyester and rubber, with three layers of polyester and one layer of rubber, and a reinforced chain cloth in the middle. It can fully lubricate and friction under effective pressure resistance.

Product Details

　　sealing tapeDetailed introduction:

Supply rubber belt vacuum filter with original factory friction belt skirt edge filter cloth scraper

Detailed description of professional manufacturing of friction belt skirt edge for vacuum belt dewatering machine:

The friction belt plays a role in supporting the operation of the belt and sealing the vacuum. During operation, it generates friction with ultra-high molecular weight materials under water lubrication.

The structure is as follows: Zhengzhou Dongyuan Electromechanical Equipment Co., Ltd. is a professional manufacturer of friction belts, specializing in the production of various vacuum belt dewatering machine friction belts. The thickness of the friction belts produced by our company is 10mm, 8mm, 6mm, and 5mm. Non standard friction belts can be customized according to user requirements, and commonly used wide belts are 35mm, 50mm, and 55mm. We adopt a long-life design concept, use equipment and manufacturing processes from Japan and Germany, and improve according to the use of vacuum belt filters and dewatering belt machines. The service life is up to 1 year. The upper and lower surfaces of the friction belt are made of different materials and materials with different hardness. The middle layer is refined with reinforced nylon thread, which is different from traditional friction belts. Do not make it a regular conveyor friction belt. Be sure to pay attention to the front and back during installation, and strictly prohibit installation in reverse.

1) Using soft rubber;

2) The skeleton adopts EP400 multi-layer chemical bonding;

3) The friction surface is made of wear-resistant polyester material.

The characteristics are:

1) Good wear resistance and no deformation;

2) High bonding strength and no delamination;

3) High tensile strength and low elongation during use;

4) Small coefficient of friction

5) The adhesive tape joint process adopts a one-time chemical forming process, with no seams on the surface, ensuring smooth and long-lasting use of the friction tape.