-
E-mail
zqz008@126.com
-
Phone
13961802200
-
Address
Shitangwan Industrial Park (Doumen), Huishan District, Wuxi City, Jiangsu Province
Product Categories
- Zhanghua Pharmaceutical Equipment
- Biological fermentation tank equipment
- ALK electrolytic cell pre tightening force monitoring system
- Three in one sterile filtration, washing, and drying
- filtration equipment
- Vacuum airflow dryer
- Portable indentation residual stress tester
- V-shaped high-efficiency mixer
- Single cone drying unit
- Filtering, washing and drying equipment
Wuxi Zhanghua Pharmaceutical Equipment Co., Ltd
Single cone spiral belt dryer
NegotiableUpdate on 02/12
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
Single cone spiral belt dryer is an efficient and multifunctional fully enclosed vertical vacuum drying equipment that integrates drying and mixing. It is a method of using a spiral belt to rotate and lift materials, and simultaneously introducing heat transfer media (such as hot water, thermal oil, steam, etc.) into the conical jacket and hollow spiral belt, so that the heated materials are lifted from all sides and dropped from the middle, rapidly and continuously circulating and flipping, and the water vapor is promptly taken away by vacuuming the cylinder; To achieve drying and mixing of materials in a short period of time.
Product Details
Single cone spiral belt dryer (single cantilever spiral single cone)
1Single cone spiral belt dryerThe basic structure
The single cantilever spiral single cone consists of a drive system, shaft seal, stirring arm, spiral, upper head, cone, cleaning system, heating system, vacuum component, and unloading system. Adopting a fully sealed design and indirect material heating method, it is particularly suitable for drying toxic and explosive materials containing solutions or moisture, and can reduce humidity to a very low level.
IISingle cone spiral belt dryercharacteristics
1. The mixing method is very gentle, and the material will not be damaged
2. After drying, the original quality of the material was well preserved
3. The driving energy consumption is very low
4. It can be dried under high vacuum, allowing for product drying to be completed at lower temperatures and providing good protection for heat sensitive materials
5. Good heat transfer effect and shorter drying time
6. The screw speed can be adjusted according to the product characteristics
7. Can achieve online cleaning
8. After drying, the moisture content can be reduced to extremely low levels
9. The process can be adjusted according to different products, with high flexibility
10. Wide operating range: the filling amount can reach 10-100% of the total workload
11. Can achieve 100% solvent recovery
12. Easy unloading without residue
13. Can quickly extract steam formed by drying
Similar Product Recommend
