Single cone vacuum ribbon dryer

NegotiableUpdate on 02/12

Model

Nature of the Manufacturer: Producers

Product Category

Place of Origin

Online Consult

Overview

Single cone vacuum ribbon dryer is an efficient and multifunctional fully enclosed vertical vacuum drying equipment that integrates drying and mixing. It is a method of using a spiral belt to rotate and lift materials, and simultaneously introducing heat transfer media (such as hot water, thermal oil, steam, etc.) into the conical jacket and hollow spiral belt, so that the heated materials are lifted from all sides and dropped from the middle, rapidly and continuously circulating and flipping, and the water vapor is promptly taken away by vacuuming the cylinder; To achieve drying and mixing of materials in a short period of time.

Product Details

　　Single cone vacuum ribbon dryerStructural characteristics and functions:

1. The equipment adopts jacket and screw internal heating, which increases the overall heating area of the equipment by about 40%.

　　2.Single cone vacuum ribbon dryerIt can achieve the effect of bottom-up circulation stirring and obtain efficient forced heat transfer performance. When the material loading rate is between 40% and *, * heating utilization can be obtained. Suitable for mixing and drying delicate materials.

3. Fully sealed system, no foreign matter contamination, high cleanliness, especially suitable for mixing and drying of pharmaceutical intermediates and raw materials, as well as for mixing and drying sterile raw materials.

4. The small gap between the single screw mixer and the container wall can effectively prevent materials from sticking to the surface of the container wall.

5. Adopting a small angle conical cylinder structure, the unloading speed is fast, clean, and does not accumulate material.

6. Equipped with a recoil device:

The dust raised during the material drying process is adsorbed onto the vacuum trap, blocking the vacuum channel. The obstruction of the gas channel directly leads to an extension of the drying time. The lower the temperature and shorter the drying time of the material during the drying process, the less the impact on the quality of the material. In response to the above reasons, our company has developed a single cone dryer with a back blowing device installed on the vacuum collector, which can maintain the smoothness of the vacuum channel during the material drying process, thereby ensuring the drying time and quality.

7. The bottom discharge valve is a suction valve with reliable sealing, which is conducive to vacuum drying.

8. The equipment has a compact structure, operates smoothly, has good sealing, no lubrication leakage, is easy to operate, and has a long service life.

9. Strong adaptability: Suitable for drying materials with high viscosity, poor thermal penetration, easy rolling and clumping into blocks

The loading coefficient can reach up to 80% of the effective volume

➢ Large heat transfer area, uniform heating of materials. The gap between the spiral belt and the cone is small, which can effectively prevent the material from sticking to the inner wall

➢ Low cutting force: does not cause damage to materials with high thermal sensitivity and particle size requirements

➢ Optional online SIP, CIP, and online sterile sampling