-
Phone
15921165535
-
Address
No. 418 Huajing Road, Shanzhong Science and Technology Park, Waigaoqiao Free Trade Zone, Pudong New Area, Shanghai
Product Categories
Duzhi Instrument (Shanghai) Co., Ltd
The UK's Easy to Measure Adhesion Tester with the ISO 106
NegotiableUpdate on 02/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Jig 106 adhesion tester is easy to operate, portable, and has a wide measurement range. The application scope includes painting or bridge spraying, coating on steel, aluminum, concrete, and so on. Test method: The forging die is attached to the coating with adhesive. 106 The internal spring is used to apply force and pull the forging die, increasing the pulling force. When the coating is pulled off the surface, the indicator on the dial will display the value of adhesion, expressed as the force applied per unit area to pull open the forging die.
Product Details
Product description
The Jig 106 adhesion tester is easy to operate, portable, and has a wide measurement range. The application scope includes painting or bridge spraying, coating on steel, aluminum, concrete, and so on.Testing method:The forging die is attached to the coating with adhesive. 106 applies force and pulling force to the forging die through internal springs, increasing the pulling force.When the coating is pulled off the surface, the indicator on the dial will display the value of adhesion, expressed as the force applied per unit area to pull open the forging die.To determine the type of failure, it is necessary to inspect the forging die surface.To provide sensitivity at low values or on uneven surfaces, a 40mm (1.52 ") forging die can be used. When using, divide the scale reading by 4.
 |
Equipped with a suitcase - suitable for on-site testing Manual operation - no power requiredTools for EN13144 and ISO 4624 testing included standard: AS 1580.408.5, ASTM D 4541, AS/NZS 1580.408.5, EN 13144, EN 24624, ISO 4624, ISO 16276-1,
JIS K 5600-5-7, NF T30-062, NF T30-606 |
|
Technical Specifications |
|||||
|
Part Number |
Product description |
scope |
|||
|
MPa (N/mm2) |
kg/cm2 |
psi |
certificate |
||
|
F106----5 |
Elcometer 106Adhesion Tester–scope5 |
0 - 0.2 |
0 - 2 |
0 - 30 |
or |
|
F106----1 |
Elcometer 106Adhesion Tester–scope1 |
0 - 3.5 |
0 - 35 |
0 - 500 |
or |
|
F106----2 |
Elcometer 106Adhesion Tester–scope2 |
0 - 7.0 |
0 - 70 |
0 - 1000 |
or |
|
F106----3 |
Elcometer 106Adhesion Tester–scope3 |
0 - 15 |
0 - 150 |
0 - 2000 |
or |
|
F106----4 |
Elcometer 106Adhesion Tester–scope4 |
0 -22 |
0 - 220 |
0 - 3200 |
or |
|
size |
scope1, 2, 5: 152 x 76mm (6 x 3”)scope3 and4: 150mm |
||||
|
Forging die diameter |
20mm (0.76”) |
||||
|
Forging die area |
314mm² (0.49square inches) |
||||
|
Gross weight of the set |
scope1, 2and5: 2.1kg (4.7lb)scope3: 3.4kg (7.5lb)scope4: 3.6kg (8.0lb) |
||||
|
Packing List |
Elcometer 106Main unit of pull-out adhesion tester,forging die20Support installation, Aralditeglue,Base support ring,Magnetic forging die clamp,Forging die cutter,ratchet wrench(Limited to scope only3&4),Suitcase and operation manual
|
||||
Follow the following standards：AS 1580.408.5, ASTM D 4541,AS/NZS 1580.408.5, EN 13144,EN 24624, ISO 4624, ISO 16276-1,JIS K 5600-5-7, NF T30-062,NF T30-606
|
Attachment |
|
|
T1062895-10 |
Spare forging die,diameter20mm (0.76”) (10individual packaging) |
|
T1062895- |
Spare forging die,diameter20mm(0.76”) (100individual packaging) |
|
T1062914- |
Large forging die, diameter40mm (1.52”) (5individual packaging) |
|
T1062915- |
Large pedestal support ring, used for40mm(1.52”)forging die |
|
T99912906 |
Aralditeepoxy glue |
|
T99914009 |
20mm (0.76')Forging die cutter |
Similar Product Recommend
