Three dimensional hydraulic micro manipulator

Product: MHW-3 3D hydraulic micro manipulator

This is Narishige's first 3D hydraulic micro manipulator designed for patch clamp. The hydraulic system can reduce expansion rate more effectively than the hydraulic system and can move accurately. 1: The 5-inch needle can reduce accumulation, and the large and hard drive system can fine tune and coarse tune the operating hand and control the hard spherical joint. By using safety accessories with dual adapters and removing the direct attachment of the bar, the installation is made more sturdy. The drum shaped control part has a large handle to provide precise operation and efficient linear repetitive operations for the instrument. In short, for a long time, design has mainly focused on fine-tuning and stabilizing performance. This model sets the standard for future micro manipulator patch clamps.

Attachment B-9 spherical joint, H-12 electric handle, Allen Wrench
Rough adjustment of motion range X30mm, Y30mm,Z30mm
Full angle button: 4mm
Fine tune X2mm, Y2mm,Z2mm
Full angle button: 50 μ m
Minimum value: 0.2 μ m
Size/Weight Control Zone W115D115H132mm, 1.6 kg
Drive area W155D155H100mm, 900g
Product: WR-6 three-dimensional hydraulic micro manipulator
Using a water pressure system can reduce the expansion coefficient caused by temperature changes. This model has a fine-tuning function and can reduce accumulation with a 1:5 needle. In addition, coarse and fine tuning can be achieved by manually adjusting each axis. The drum shaped control part has a large handle to provide precise operation and efficient linear repetitive operations for the instrument. In short, for a long time, design has mainly focused on fine-tuning and stabilizing performance. This model sets the standard for future micro manipulator patch clamps. WR-6 has a wide range of applications: it can be fixed on the microscope stage with a bar, but a magnetic mount can also be used when installed separately.

Attachment B-8D spherical joint, H-1 electrode handle
P-1A height adjustment disc, Allen Wrench
Rough adjustment of motion range X18mm, Y18mm,Z18mm
Fine tune X2mm, Y2mm,Z2mm
Full angle button: 50 μ m
Minimum value: 0.2 μ m
Size/Weight Control Zone W115D115H132mm, 1.6kg
Drive zone W110D60H140mm, 0.4kg
Product: MHW-103 3D hydraulic micro manipulator
The liquid pressure controller is mainly used to solve the stacking problem of membrane clamp when using a 1:5 needle system. Because it can limit the driving range to a minimum of 2mm, customers who want a wide range adjustment of the drive are recommended to choose this one that utilizes a 1:1 needle controller. The drum shaped control part has a large handle to provide precise operation and efficient linear repetitive operations for the instrument. The leakage caused by temperature changes in hydraulic systems is much less than that in hydraulic systems. So it is more suitable for patch clamp. The coarse adjustment controller cannot be raised, so it must be purchased separately.

Attachment B-8C spherical joint, H-7 straw bracket, Allen Wrench
Fine adjust the range of motion by X10mm, Y10mm,Z10mm
Full angle button: 250 μ m
Minimum value: 1 μ m
Size/Weight Control Zone W115D115H132mm, 1.6kg
Drive zone W40D60H87mm, 0.18kg
Product: NMN-21 3D manual micro manipulator
Leakage and electromagnetic interference are serious problems in the operation of patch clamp. This mechanical microcontroller is specially designed for patch clamp: it does not require the use of a water pressure system (to prevent leakage caused by weather changes), does not leak water (mechanical leakage phenomenon), and does not require a motor (because it generates noise). The body is designed for shock absorption, so even in high magnification situations, panic problems will not occur. The drum shaped design, which enjoys a high reputation as a hydraulic method, has a more stable performance with a stable center of gravity. The overall body is very compact, requiring very little installation space. Coarse and fine adjustments are installed on the compact body, and this model can control the required all-round movement, from micro electrodes to microscope objectives to make them contact cells.
Attachment UST-2 Solid State Universal Connector, Installation Platform, H-1 Electric Handle, Allen Wrench
Rough adjustment of motion range X15mm, Y15mm,Z15mm,
Full angle button: m4m
Fine tune X6mm, Y6mm,Z6mm,
Full angle button: 250 μ m
Minimum value: 1 μ m
Size/Weight W110D170H105mm, 930g
Product: NMN-25 3D Manual Operator
The characteristic of NMN-25 is the slim body part used for multi-channel recording. In addition, the handle has changed from three directions to one direction. Enable it to install multiple controllers and operate at close range without disturbing each other. The use of isolation platforms makes it easier to install multiple controllers. Like the NMN-21 controller developed for patch clamp, this manual controller utilizes coarse and fine tuning movements and body noise reduction design. So,. Accurate and stable operation, and effective prevention of leakage and electromagnetic interference.

Attachment specific universal joint, installation table
H-12 electric handle, Allen Wrench
Motion range X coarse adjustment 15mm, fine adjustment 6mm, fine adjustment button full angle: 250 μ m
Y coarse adjustment 15mm, fine adjustment 15mm, fine adjustment button full angle: 250 μ m
Z coarse adjustment 15mm, fine adjustment 6mm, fine adjustment button full angle: 250 μ m
Size/Weight W155D60H100mm, 600g
Product: MWO-202 3D Hydraulic Coarse/Fine Adjustment Micro Operator
This is an innovative microcontroller that combines vertical coarse tuning and fine tuning. The outstanding features include an easy-to-use operating lever, a straw replacement mechanism that allows you to replace two straws at the same time, a rotating mechanism that allows you to easily change the straw through the rotating body, and a straw shuttle mechanism that allows you to easily store the straw in its original position after repeated lifting. The cooperation of all sports makes it unnecessary to choose and combine different models, and the installation is extremely simple. MWO-202 is a versatile and highly efficient model.

Attachment IP-1 iron plate, UT-2 universal joint, CF-3 fixed pipe, Allen Wrench
Coarse adjustment of motion range 14mm, full angle button: 1.25mm
Fine tune X11mm, Y11mm,Z11mm
Full angle button: 500 μ m
Minimum value: 4 μ m
Control lever: 2mm
Size/Weight Control Zone W170-180D80-90H175-190mm, 2.1kg
Drive area W65D95H120mm, 0.45kg
Product: MMO-203 3D hydraulic micro manipulator
The pressure drive system of this microcontroller can be remotely controlled and provides smooth, vibration free motion. As the inheritor of a cursor, its feature is a large barrel control area that can provide very fine operation. Another major feature is the high replication rate of linear positions. Compared to the recently popular joystick methods, this controller has a long usage history among wise users due to its simple design and high efficiency. For micro injection systems, when used in conjunction with joystick type controllers, they have a high utilization rate in cell maintenance.

Attachment B-8C spherical joint, H-7 suction tube holder, CF-3 fixed tube
Fine adjust the range of motion by X10mm, Y10mm,Z10mm
Full speed rotation button: 250 μ m
Minimum value: 1 μ m
Size/Weight Control Zone W115D115H132mm, 1.6kg
Drive zone W70D50H80mm, 0.15kg