- Phone
-
Address
Room 706, Building 5, Xizi International Center, 898 Xiuwen Road, Minhang District, Shanghai (201199)
Product Categories
Shanghai Yifeng Instrument Equipment Co., Ltd
TischTE-6.4 Continuous Particle Monitor
NegotiableUpdate on 03/03
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The Continuous Particulate Analyzer (TE-64) can provide real-time continuous measurement of TSP, PM10, PM25, and PM10 in the air. The analyzer uses spectroscopy to obtain particle size classification of particulate matter.
Product Details
Tisch TE-6.4 Continuous Particle Monitor
Real time continuous measurement of TSP, PM10, PM2.5, and PM1.0 in the air
The Continuous Particulate Analyzer (TE-6.4) can provide real-time continuous measurement of TSP, PM10, PM2.5, and PM1.0 in the air. The analyzer uses spectroscopy to obtain particle size classification of particulate matter. Firstly, the pump continuously draws in air and passes it through the spectrometer. As the particles pass through the spectrometer's laser beam, the spectrometer will analyze each particle. The particulate matter will be collected onto the built-in reference filter, which can be used to confirm the weight of the particulate matter. The advanced microprocessor in the spectrometer will analyze each particle and perform particle size classification, even obtaining mass concentrations in the μ g/m ³ range.
In "environmental mode", the analyzer can simultaneously monitor the concentrations of TSP, PM10, PM2.5, and PM1.0; In the 'workplace mode', inhalable particulate matter, chest particulate matter, and respiratory particulate matter (particle size range 0.5-20 μ m) in the ambient air can be monitored simultaneously.
Product features
Characteristic
Real time particulate air quality monitoring;
Simultaneously measure PM10/PM2.5/PM1;
Fixed point monitoring;
Low operating and maintenance costs;
Built in data logger that can connect up to 6 weather sensors;
Internal 12VDC voltage is safer to use;
You can directly connect to the front panel through a computer to download data;
The built-in reference filter can calibrate the mass concentration of the instrument;
Heating inlet controls the relative humidity of the sample;
Can be remotely connected via GSM;
Product Application
Application
Occupational health, health and safety monitoring
Patrol monitoring
Fixed detection and environmental detection
Test respiratory equipment or air filtration efficiency
research project
Technical Specifications
Parameter
measurement parameters
Analyze particulate matter: TSP, PM10, PM2.5, and PM1.0; Inhalable particulate matter, chest particulate matter, and respiratory particulate matter
Range: 0~6000 μ g/m ³
Detection line: 0.01 μ g/m ³
Particle size range: 0.5~20 μ m
Particle counting mode: 3 particle size channels
Sample flow rate: 600ml/min
Reference filter membrane: 25mm glass fiber filter membrane
Security: Password protection
Power parameters
Power supply: 230VAC
Power consumption: 12VDC 1A (instrument 0.3A heater 0.7A)
External power pack: 80-120VAC input, waterproof
communication parameters
RS232 9600baud PC connection
Analog output: 0~4V
Analog input: two 0~5V
Meteorological parameter input: wind speed and direction, rainfall, temperature, humidity
physical parameters
Operating temperature: -5~50 ℃
Dimensions (H * W * D): 533mm * 305mm * 152mm
Net weight: 12Kg
Similar Product Recommend
