Tunnel Oven FB Series

Tunnel Oven Series 1:

Technical parameters of tunnel oven for drying penicillin bottles:
1. Air supply method: forced air circulation
2. Temperature range: RT+10 ℃~300 ℃
3. Temperature indication accuracy: ± 1.0 ℃
4. Temperature distribution (environment): ± 1.0 ℃
5. Temperature control device: Fuji P.I.D intelligent temperature control instrument, LED digital display and setting, P.I.D automatic calculation, time timing.
6. Material: Inner stainless steel, outer steel plate with electrostatic spray coating.
7. Transmission method: chain rod, chain mesh, automatic roller; Super strong load-bearing capacity.
8. Characteristic composite electric heater
9. Protection devices: leakage protection, circuit breaker protection, motor overload protection, grounding protection, warning buzzer under abnormal conditions.

Special tunnel oven for drying penicillin bottles. Purpose of oven:
The specialized drying lines for large mouthed bottles, glassware, ampoules, and ampoules are continuous drying equipment that can continuously dry and improve product production efficiency

Special tunnel oven for drying penicillin bottles features:
1. Equipped with chain transmission on both sides, it solves the problem of running off during the transmission process.
2. The oven is heated in sections, controlled by an independent electrical box, and easy to operate. The structure mainly consists of two parts: the conveyor system and the drying furnace, with multiple independent sections.
3. Fuji intelligent temperature controller, PID temperature control, uniform temperature inside the furnace.
4. The conveying speed is variable frequency and adjustable, with smooth operation and high production efficiency.
5. 1.5mm stainless steel chain plate conveyor, CNC machining, production line leveling.

Tunnel Oven Series 2:

LED aluminum substrate pre film drying production line oven technical parameters:
1. Air supply method: forced air circulation
2. Temperature range: RT+10 ℃~300 ℃
3. Temperature indication accuracy: ± 1.0 ℃
4. Temperature distribution (environment): ± 1.0 ℃
5. Temperature control device: Fuji P.I.D intelligent temperature control instrument, LED digital display and setting, P.I.D automatic calculation, time timing.
6. Material: Inner stainless steel, outer steel plate with electrostatic spray coating.
7. Transmission method: chain rod, chain mesh, automatic roller; Super strong load-bearing capacity.
8. Characteristic composite electric heater
9. Protection devices: leakage protection, circuit breaker protection, motor overload protection, grounding protection, warning buzzer under abnormal conditions.

LED aluminum substrate pre film drying line oven features:
LED aluminum substrate pre film drying line oven, PCB substrate pre film drying line oven, PCB substrate cleaning moisture drying tunnel oven, LED aluminum substrate cleaning moisture drying hot air tunnel oven, PCB substrate 100 degree moisture drying hot air tunnel oven

LED aluminum substrate pre film drying production line oven detailed information:
After chemical cleaning (or mechanical cleaning) of the PCB substrate, moisture has penetrated into the substrate, and residual moisture is often one of the reasons for sand holes or weak film adhesion. Therefore, it is necessary to remove moisture from the board surface and holes to ensure that the board is dry during film application. Usually, physical drainage is carried out first, such as drying with an air knife, and then placed in a hot oven at 110 ± 5 ℃ for thermal evaporation for 10-15 minutes. The hot air circulation oven produced by the company has a temperature control range of room temperature+10 ℃~300 ℃, with a temperature uniformity of ± 1.5%. It is used for substrate drying treatment before applying dry film to PCB substrates
Application of production line baking oven: The oven production line is a continuous drying equipment, and the tunnel oven can continuously bake without interruption, improving product production efficiency.

LED aluminum substrate pre film drying line oven features:
1) Equipped with chain transmission on both sides, it solves the problem of running off during the transmission process.
2) The oven is heated in sections, controlled by an independent electrical box, and easy to operate. The structure mainly consists of two parts: the conveyor system and the drying furnace, with multiple independent sections.
3) Fuji intelligent temperature controller, PID temperature control, uniform temperature inside the furnace.
4) The conveying speed is variable frequency and adjustable, with smooth operation and high production efficiency of the tunnel furnace.
5) 1.5mm stainless steel chain plate conveyor, CNC machining, production line leveling.

Our company also undertakes other customized tunnel ovens: LED pre adhesive bracket preheating tunnel oven, needle tube sealing black adhesive curing tunnel oven, filter paper curing special oven/tunnel production line oven (LED packaging adhesive filling baking curing baking equipment), single-sided aluminum substrate hot air oven, etc. Welcome to inquire by phone.

Image display: