YP-DYJ Eye Drops Filling and Capping Machine

● Introduction

YP-DYJ Eye Drops Filling and Capping MachineThe eye drop filling equipment developed by our professional technical personnel. Adopting dual head positioning filling.

● Characteristics

Microcomputer controlled peristaltic pump filling, high precision, can adjust the filling amount without stopping the machine.

Filling, plugging, and capping machine, saving space. Simple structure, beautiful appearance, and easy cleaning.

The equal distribution disk has accurate positioning, smooth operation, and can be applied to multiple specifications.

Touch screen control panel, simple, convenient, variable frequency speed regulation, high degree of automation.

● Working principle

This machine uses a bottle sorting machine to transport bottles, a positioning system, a filling mechanism, and inner plugs and outer caps The feeding system, capping system, bottle collection system, and electronic control are important components. Relying on the positioning of the dividing disc, the cam drives the needle to move up and down for filling. Divide the tray for positioning and filling, shake the plug, use pneumatic plugging, add an outer cap, screw the cap, and complete the bottle dispensing process.

YP-DYJ Eye Drops Filling and Capping MachineMain technical parameters

Instructions for Use
1. Because this filling machine is an automated machine, it is required to have uniform sizes for easy to pull bottles, bottle pads, and bottle caps.
2. Before driving, you must first use the joystick to rotate the machine and check if there are any abnormalities in its rotation. Only after confirming that it is normal can you start driving.
3. When adjusting the machine, appropriate tools should be used, and it is strictly prohibited to use excessive tools or force to disassemble parts to avoid damaging the components or affecting the performance of the machine.
4. After adjusting the machine, it is necessary to tighten the loose screws and rotate the machine with a shaking handle to check if its movement meets the requirements before starting the car.
5. The machine must be kept clean, and it is strictly prohibited to have oil stains, chemicals, or glass shards on the machine to avoid damage to the machine. Therefore, it is necessary to:
⑴ During the production process, the machine should promptly remove liquid medicine or glass debris.
Before handing over the shift, each part of the machine surface should be cleaned once, and clean lubricating oil should be added to each activity department.
⑶ It should be thoroughly cleaned once a week, especially in areas that are not easily accessible during normal use, or blown clean with compressed air.

Installation precautions:
1. After unpacking the machine, first check whether the random technical information is complete and whether the machine is damaged during transportation, in order to solve it in a timely manner.
2. Install and adjust the feeding and discharging components according to the outline diagram in this manual.
3. Apply new lubricating oil to each lubrication point.
4. Rotate the machine with a joystick to check if the machine is running in the correct direction (counterclockwise facing the motor spindle), and the machine must be grounded for protection.