ZZC-3A DC Resistance Tester

The DC resistance test of transformer windings is an essential test item for transformers after handover, major repairs, and changes to tap changers. By measuring the DC resistance of the transformer winding, the welding or connection quality of the leads, the presence of inter turn short circuits or open circuits in the winding, and the good contact of the tap changer can be checked. In the past, QJ44 double arm bridge was used to measure direct resistance, and the measurement current of this type of bridge is in the milliampere range, which requires a long measurement time and low accuracy. In order to change this situation, shorten measurement time, and reduce the workload of testers, the ZZC-3A DC resistance rapid tester has been developed.

This transformer DC resistance tester is a high-precision replacement product for DC single and double arm bridges. The instrument adopts advanced switching power supply technology, with a measurement speed more than 100 times faster than that of a bridge. The display part displays the measurement results on a four and a half digit LCD liquid crystal display, and the environmental temperature or test current value on a three and a half digit LCD liquid crystal display. It overcomes the disadvantage of other similar products that display values on LED in sunlight, and also has an automatic arc extinguishing function. This instrument has the advantages of fast speed measurement, high accuracy, intuitive display, strong anti-interference ability, small size, low power consumption, stable and reliable test data, and is not affected by human factors. The instrument is equipped with a rechargeable battery pack (12V), which can be used for both AC and DC, making it convenient for on-site and field testing.

The transformer DC resistance tester meets the requirements of DLT 845.3-2004 "General Technical Conditions for Resistance Measurement Devices Part 3 DC Resistance Tester".

This transformer DC resistance tester is an ideal instrument for measuring the DC resistance of various inductive loads such as power transformers, large motors, and transformers, as well as the contact resistance of low-voltage switches, wire and cable or weld interface resistance.

Product nickname: DC Resistance Speed Tester, Transformer DC Resistance Tester, Transformer DC Resistance Speed Tester, Transformer DC Resistance Fast Tester, Inductive Load DC Resistance Speed Tester, Inductive Load DC Resistance Fast Tester, Inductive Load DC Resistance Tester, DC Resistance Tester, DC Resistance Tester.

Note:1. The appearance of the product is subject to the actual product. Technical parameters and models are subject to change without prior notice. If there is any act of theft or copying, legal responsibility will be pursued
2. To learn more about Huayi products, please enter the product center. Service Hotline:

1. Fast testing speed: The maximum output charging current of this instrument can reach 3A. During measurement, it can effectively compensate for the current inertia of large inductive devices, accelerate the saturation of the iron core, shorten the charging time, and improve the testing speed. It is hundreds of times faster than traditional single and double arm bridge instruments;

2. High accuracy: In addition to using advanced four terminal measurement method, this instrument also adopts advanced constant current power supply technology to maintain a relatively stable charging current for inductive loads, with stable anti sensing ability and strong anti-interference ability, thereby ensuring measurement accuracy. And using high-quality imported components from abroad, the measurement results have high accuracy and good repeatability;

3. Wide measurement range: Resistance measurement range is 1 μ Ω～ 2K Ω, with a wide range;

4. Dual use of AC and DC: This instrument comes with a rechargeable battery pack for AC and DC power supply. It is designed to be portable and easy to use and carry;