Ultra fine crushers are generally sieve free crushers, and the particle size of the crushed material is controlled by the airflow velocity. The required particle size for crushing is 95% passing through 0.15mm (100 mesh). Ultra fine pulverizers can be widely used in various industries such as traditional Chinese medicine, western medicine, pesticides, biology, cosmetics, food, feed, chemical industry, ceramics, etc. Below, the editor of Xianji.com will introduce the principle, operating procedures, usage methods, characteristics, maintenance and repair knowledge of ultrafine crushers.

The usage method of the ultrafine grinder is as follows:

Before using this machine, please turn off the power switch first.

1. Open the upper cover (clockwise close, counterclockwise open).

2. Put the dried medicine into the crushing box.

3. Close the top cover tightly.

4. Plug in the power and turn on the timer switch.

5. When the rolling sound is relatively uniform, it indicates that the medicine has been crushed into powder and can be turned off.

6. Open the lid and pour out the powder.

Operating procedures for ultrafine pulverizer

1. Before starting up, check if there is oil in the lubrication area.

2. Remove metal, sand, stone, and other debris from materials to prevent damage to machinery.

3. Hands must not be inserted into the feeding port, and the machine cover must not be opened during operation.

4. The aperture of the sieve should be selected appropriately, and any damaged areas should be riveted.

5. It is strictly prohibited to start the machine under load. The machine should run for one minute before evenly feeding, and appropriate water should be added during the beating process.

6. Empty the machine for 2 minutes before stopping to remove any remaining materials.