2D mixer

2D mixer

2D mixerWidely used in industries such as pharmaceuticals, chemicals, food, dyes, feed, fertilizers, pesticides, etc., especially suitable for mixing various solid materials with large tonnage (300L-20000L).

2D mixerWidely used in industries such as pharmaceuticals, chemicals, food, dyes, feed, fertilizers, pesticides, etc., especially suitable for mixing various solid materials with large tonnage (300L-20000L).
　　2D mixerThe full name is a two-dimensional motion mixer, as the name suggests, which refers to a mixer with a rotating drum that can move in two directions simultaneously. The two directions of motion are the rotation of the drum, which swings with the swing frame. The mixed material rotates, flips, and mixes inside the drum, while also moving back and forth with the swing of the drum. Under the combined action of these two movements, the material is fully mixed in a short period of time.

working principle:
　　　2D mixerIt consists of three main parts: drum, swing frame, and machine frame. The drum is mounted on a swing frame, supported by four rollers and axially driven by two gear wheels. Among the four supporting rollers, two transmission wheels are driven by a rotating power system to rotate the drum. The swing frame is driven by a set of crank swing rod mechanisms, which are mounted on the frame. The swing frame is supported on the frame by bearing components, allowing the rotating drum to participate in swinging while rotating, allowing the materials in the drum to be fully mixed.
Equipment selection:
　　2D mixerThe models range from 300 liters to 20000 liters, and generally, their loading capacity is about half of the total volume.

Application:
Widely used for mixing powder and granular materials. It has the characteristics of rapid mixing, large mixing volume, and convenient discharge.
Application areas: Chemical material types: Powder and granular materials
Applicable materials: dry powder, power type, electric
Working mode: convection mixer, barrel movement mode: two-dimensional
Structural form: Cylinder mixer Product type: New

Features:
The drum of a two-dimensional motion mixer can perform two movements simultaneously, one is the rotation of the drum and the other is the swinging of the drum with the swing frame. The mixed material rotates, flips, and mixes inside the drum, while also moving back and forth with the swing of the drum. Under the combined action of these two movements, the material is fully mixed in a short period of time. The two-dimensional mixer is suitable for mixing all powder and granular materials.

Animation demonstration schematic:

2D mixerDetails section:

2D mixerModel parameters:

2D mixerMaterial configuration:

2D mixerDetailed equipment and material list:

Conversion of loading factor:
The loading of general mixed equipment is converted based on the volume of the material cylinder. Each time the material is loaded, according to the specific gravity of the material (usually using the specific gravity of water as a reference), the actual volume of the material cylinder X80% is equal to the effective loading space, and then the effective space X80% is used, which is the mass you are preparing to load now. If the specific gravity of the material changes, use the effective space volume X80% X the specific gravity of the material, which is the mass of the prepared loading. If the customer's prepared loading mass is too large, they need to explain to the manufacturer and choose a reinforced model, otherwise it will affect the service life of the equipment!