Electric brush self-cleaning filter

Product Introduction

When L-shapedElectric brush self-cleaning filterWhen the pressure difference between the inlet and outlet reaches the preset value or reaches the cleaning time, or when manually prefabricated, the filter will begin the self-cleaning process. The entire self-cleaning process includes two steps: opening the automatic drain valve located on the self-cleaning filter; The motor drives the cleaning system (cleaning brush or scanning nozzle) inside the self-cleaning filter screen, and the impurities intercepted by the filter screen are discharged from the drain valve. The entire cleaning process takes about 15 seconds (can be set according to user requirements), and the system does not cut off during cleaning. The entire operation of the self-cleaning filter is controlled by a randomly equipped intelligent control box. The control methods can be selected from differential pressure, time, manual, and PLC control.

parameter

Operating flow rate: 20-5000m3/h (please contact the manufacturer for details, the corresponding flow rate may vary depending on the water quality and accuracy)

Low working pressure: 2kg (if the working pressure is too low, a booster pump equipment can be installed at the discharge outlet)

Maximum working pressure: 10kg, 150psi (high-pressure type can be customized according to user requirements, please contact the manufacturer for details)

Drain valve size: 25mm, 50mm, 80mm Cleaning time: 30-60 seconds Water consumption per cleaning:<5%

Electric brush self-cleaning filterProduct Parameters