Water cutting mesh (fully automatic) solid-liquid separation system

Water cutting mesh (fully automatic) solid-liquid separation systemProduct Introduction

The main body of the water cutting mesh solid-liquid separator is a stainless steel flat filter screen made of precision wedge-shaped steel rods. The wastewater to be treated is evenly distributed on the inclined screen surface through an overflow weir. Due to the small and smooth surface gap of the screen and the large back gap, the drainage is smooth and not easily blocked; Solid substances are intercepted, and filtered water flows out from the gaps of the sieve plate. At the same time, under hydraulic action, the solid substances are pushed into the spiral groove at the lower end of the sieve plate, and then pushed forward by the spiral to the extrusion section for further dehydration. The dehydrated dry residue is discharged from the discharge port, thus achieving the purpose of solid-liquid separation.

The water cutting mesh solid-liquid separation machine can effectively reduce the concentration of suspended solids in water and alleviate the processing load of subsequent processes. It is also used for solid-liquid separation and recovery of useful substances in industrial production, and is an excellent equipment for filtering or recovering solid or colloidal substances such as suspended solids, floating solids, and sediments.

Product Features

1. Network management extrusion is designed to adapt to high concentration sewage such as blister manure (high bed type), pig farms, chicken farms, cattle farms, etc. Its operation process can stably maintain a solid moisture content of 65%, which is not comparable to general spiral extrusion.

2. The early filtration utilizes the gravity of the water flow itself, without energy consumption; The squeezing part has low power and low energy consumption.

3. Breaking through the technology of Europe, America, and Japan, the water cutting net is self-produced with a gap of 0.4-0.5mm. It has a large processing capacity per unit, the easiest post-processing, and the longest service life.

4. Gear type reverse cleaning mechanism, no consumables such as steel cables and electrical components, renewable for use.

5. Automatic detection, starting at full water level, filtering, pressure drying, intermediate screen cleaning, and screen cleaning during shutdown. The filtering is fully automatic and not easily blocked, making cleaning convenient (the whole machine works automatically and has automatic screen cleaning function).

Water cutting mesh (fully automatic) solid-liquid separation systemScope of Application

1. Used for the treatment of small-scale industrial wastewater such as aquaculture, papermaking, slaughtering, leather, sugar production, brewing, kitchen waste, textiles, printing and dyeing, petrochemicals, etc., to remove solid substances such as suspended solids, floating solids, and sediments;

2. Used for recycling useful substances such as fibers and slag in industries such as papermaking, alcohol, starch, and food processing.

3. Used for pre-treatment of sludge or river dredging.

Structural appearance and working principle diagram:

(Based on the current situation of manure treatment by Muyuan Group, Shanghai Dunqi has developed a large processing capacity water cutting net machine, which has increased the number of pigs that can be adapted to 10000 pig farms to 20000, reducing processing costs and greatly improving efficiency. It has now been fully matched by Muyuan, Zhengbang, Dabeinong, and Zhengda pig farms.)

1、 Product quotation for fully automatic water cutting net solid-liquid separator

Equipment accessories: (excluding tempering mixing system)

1、 Inclined solid-liquid separator

2、 Feeding system