FZG series low-temperature vacuum drying oven

FZG series low-temperature vacuum drying ovenIt is to dry the dry material under vacuum conditions. It uses a vacuum pump to extract air and moisture, creating a vacuum state in the working chamber, reducing the boiling point of water, and accelerating the drying process.

Our company adheres to the corporate philosophy of "technology first, people-oriented", constantly innovating, persistently pursuing, and will continuously meet the needs of our customers with reasonable design, performance, and perfect service. We warmly welcome new and old customers to visit, guide, and negotiate business!
FZG series low-temperature vacuum drying ovenThis machine can achieve a higher drying rate at lower temperatures, fully utilize heat, and is mainly suitable for drying thermosensitive materials and materials containing solvents and solvents that need to be recovered. Before drying, it can be non-toxic, and no impurities are mixed in during the drying process. This dryer belongs to a static vacuum drying oven, so the formation of dried materials will not be damaged. The products include: low-temperature and high-temperature vacuum drying oven series, conventional vacuum drying oven, multifunctional digital display temperature control vacuum drying oven, and fully automatic PLC controlled touch screen operation vacuum drying oven.

Instructions for Use:
1. The box is placed on a dry indoor floor and workbench, and no other fixed devices are required for the carbon dioxide incubator.
2. A knife switch or air switch should be installed in the power supply line for this box, and a wire twice the cross-sectional area of the power line should be used as the grounding wire.
3. Before powering on, check the electrical performance of this box and pay attention to whether there is any open circuit or leakage.
4. When everything is ready, the test sample can be placed, the box door can be closed, and if necessary, the exhaust valve of the drying oven can be opened with a gap of about 10mm.
5. A separated water incubator, with a constant temperature water bath, connects distilled water or deionized water to the inlet and adds water until it overflows.