-
E-mail
czbkgz@126.com
-
Phone
13776809887
-
Address
Zhenglu Town Industrial Development Zone, Changzhou City
Product Categories
Changzhou Baokang Drying Machinery Co., Ltd
Pressure spray dryer for Chinese medicine residue extract
NegotiableUpdate on 02/09
- Model
- Nature of the Manufacturer
- Producers
- Product Category
- Place of Origin
Overview
The pressure spray dryer for the extract of traditional Chinese medicine residue is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate, and nozzle size of the material liquid pump can be adjusted to obtain the required spherical particles in a certain size ratio. Spray dryer is a kind of continuous atmospheric pressure dryer. Spray the liquid material into a mist using special equipment, and dry it by contacting it with hot air. Used for drying some heat sensitive liquids, suspensions, and viscous liquids, as well as for drying fuels, intermediates, soap powders, and inorganic salts.
Product Details
Pressure spray dryer for Chinese medicine residue extract
working principle
The pressure spray dryer for the extract of traditional Chinese medicine residue sends liquid materials into the pressure atomizer through high pressure, and atomizes them into small droplets. These droplets fully contact with hot air, quickly complete the drying process, and finally get the finished product of powder or fine particles. Specifically, after being filtered and pressurized, the liquid material is sent to a pressure atomizer through a high-pressure pump, where it is atomized into small droplets. When these droplets come into contact with hot air, the moisture evaporates rapidly, completing the drying process.
Scope of Application
The pressure spray dryer is widely used for drying a variety of materials, including food, chemical, pharmaceutical and other fields. Its advantages include fast drying speed, suitability for drying heat sensitive materials, and flexible operation.
For example, in the food industry, spray drying technology can quickly dry liquid food raw materials into powder to maintain their nutritional composition and taste; In the chemical industry, spray drying can be used to prepare various chemical powders. In addition, the pressure spray dryer is also suitable for drying aqueous solution and organic solvent materials. The raw material liquid can be solution, slurry, emulsion, etc.
Performance Characteristics
The drying speed is fast, and the surface area of the material liquid is greatly increased after atomization. In the hot air flow, 95% -98% of the water can be evaporated in an instant, and the drying time only needs tens of seconds to tens of seconds. It is particularly suitable for drying heat sensitive materials.
All products are spherical particles with uniform particle size, good flowability, good solubility, high product purity, and good quality.
Simple and stable operation, convenient control, and easy implementation of automated tasks.
Widely applicable, according to the characteristics of the material, it can be dried with hot air or granulated with cold air, with strong adaptability to the material.
Technical Reference
project |
YPG-25 |
YPG-50 |
YPG-100 |
YPG-150 |
YPG-200 |
YPG-300 |
YPG-500 |
YPG-1000-2000 |
Evaporation rate（kg/h） |
25 |
50 |
100 |
150 |
200 |
300 |
500 |
1000-2000 |
Diaphragm pump power（kw） |
0.35 |
4 |
7.5 |
11 |
15 |
22 |
30 |
This indicator is determined based on the actual situation |
Diaphragm pump pressure（Mpa） |
Based on the experimental results of the materialsAdjust between 0.6-5, generally operating between 1-3. |
|||||||
Heating method |
electricity |
electricity+Steam |
electricity+Coal fired (oil fired) hot blast stove |
|||||
Tower diameter（mm） |
1300 |
1800 |
2400 |
2600 |
2800 |
3200 |
3800 |
|
Total height of equipment（mm） |
7800 |
9200 |
11600 |
14000 |
15300 |
17100 |
19000 |
|
Similar Product Recommend
